OX-070 Datasheet, PDF (3/6 Pages) Vectron International, Inc – High Stability Oven Controlled Crystal Oscillator

Additional Parameters
Parameter
Min
Typical Max
Units
Condition
Phase noise³
-95
dBc/Hz
-125
dBc/Hz
-140
dBc/Hz
-145
dBc/Hz
-145
dBc/Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
@ 10MHz
For lower phase noise, please review the OX-174 datasheet.
Allan Deviation
5e-12
8e-12
1e-11
5e-11
1 s tau
10 s tau
100 s tau
1000 s tau
@ 10MHz
For oscillators with lower ADEV requirements. Please review the OX-174 datasheet.
For oscillators with TDEV and MTIE requirements. Please review the OX-172 datasheet.
g-sensitivity
1
ppb/g
g-sensitivity of 0.5 ppb/g available in this package size. Please contact factory for ordering information.
For g-sensitivity <0.5 ppb/g, please review the OX-043 series.
Weight
25
g
Absolute Maximum Ratings
15.0
VDC
Output load
50
pF
25
open
Ohms
CMOS
Sine
Operable temperature range
-55
Operable temperature range implies the
device will continue to operate with no long-
+95
°C
term damage to unit; however, it will not be
specification compliant outside the operating
temperature range.
Environmental and Product Classification
Shock (Endurance)
MIL-STD-202, Method 213, Condition J, 30g 11 ms
Sine Vibration (Endurance)
MIL-STD-202, Method 201 and 204, Condition A, except 5g to 500 Hz, 1 sweep each axis
Random Vibration (Endurance) MIL-STD-202, Method 214, Condition I-D
Humidity
MIL-STD-202, Method 103, Condition B, 100% rh
Seal
MIL-STD-202, Method 112, Condition D, hermetic, washable
Altitude
MIL-STD-202, Method 105, sea level to space
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition A,B,C
Terminal Strength
MIL-STD-202, Method 211, Condition C (5 bends at 45^o, 2 lbs)
Moisture Sensitive Level
1
RoHS
6 (fully compliant)
Storage Temperature Range
-55
+125
°C
Page 3 of 6
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com