OX-046_14 Datasheet, PDF (3/5 Pages) Vectron International, Inc – VHF low g-Sensitivity Oven Controlled Crystal Oscillator

Parameter
Weight
Supply voltage (Vs)
Output Load
Operable Temperature Range
Shock (Operating)
Shock (Endurance)
Sine Vibration (Operating)
Sine Vibration (Endurance)
Random Vibration (Operating)
Random Vibration (Endurance)
Seal
Humidity
Altitude
Resistance to Soldering Heat
RoHS
Terminal Strength
Moisture Sensitivity Level
Storage Temperature Range
Min Typ Max Units
Condition
Additional Parameters¹
150
g
Absolute Maximum Ratings
28
V
25
open ohm
-55
+85
°C
Environmental Specifications
MIL-STD-202, Method 213, Condition J, 30G, 11ms, half sine
Mil-STD-202, Method 213, Condition C, 100G, 6ms, half sine
Mil-STD-202, Method 204, Condition C, 10 G
Mil-STD-202, Method 204, Condition D, 20 G
Mil-STD-202, Method 214, Condition I-C, 9.26 Grms, 3-5min/axis (without vibe comp)
Mil-STD-202, Method 214, Condition I-A, 5.35 Grms, 3-5min/axis (with vibe comp)
Mil-STD-202, Method 214, Condition I-H, 29.28 Grms, 3hrs/axis
Nonhermetic - Mil-STD-202, Method 112, Condition D available only as custom part
number - please contact factory
MIL-STD-202, Method 103, Condition B, 90% rh
MIL-STD-202, Method 105, sea level to 30,000 ft
MIL-STD-202, Method 210, Condition A,B,C
not RoHS compliant
MIL-STD-202, Method 211, Condition C (5 bends at 45^o, 2 lbs)
1
-55
+125
°C
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com