TFS86A Datasheet, PDF (2/4 Pages) Vectron International, Inc – Filter Specification

t_{_}fs_{_}8_{_}6_{_}a_{_}.d_{_}o_{_}c_{_________________________________________}v_{_}e_{_}r_{_}si_{_}o_{_}n _{_}1_{_}.1_{_________________________________________}0_{_}6_{_}.0_{_}1_{_}._{_}02_{_}
V_{__}I_{__}T_{_}E_{__}L_{_}E_{__}F_{_}I_{_}L_{__}T_{_}E_{__}R_{____________________}F_{__}i_{_}lt_{_}e_{__}r_{__}S_{__}p_{_}e_{__}c_{_}i_{_}fi_{_}c_{__}a_{_}t_{_}io_{__}n_{_______________________}T_{_}F_{__}S_{__}8_{_}6_{__}A_{________}2_{__}/_{_}4_{_}
Construction and pin configuration
TFS 86 A
tft L1
-
R0.15
4
5
9
10
1,2,3,6,7,8
Output
Output RF return
Input
Input RF return
Ground
Note: The filter has the same impedance for input and output. The orientation of the marking referring to soldering pads can
deviate from filter to filter. The orientation of marking and/or soldering pads can change from filter to filter also in case of tape &
reel and is not defined in any way. Only the mounting surface of the filters faces the bottom side of the embossed carrier tape.
50 Ω matching network
Input
50 Ohm
C1
9
5
SAW
10
4
L1
L1
Output Input
50 Ohm 50 Ohm
C2
L2
9
5
SAW
10
4
C1
L2
Output
50 Ohm
C2
1,2,3,6,7,8
1,2,3,6,7,8
Note: The filter operates in the matching network in the same manner if the filter is inserted with a rotation of 180 °.
Stability Characteristics
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.