TFS468B Datasheet, PDF (2/4 Pages) Vectron International, Inc – Filter Specification

tfs468B.doc
VI TELEFILTER
Version 2.2
Filter Specification
Construction and Pin Configuration
(All Dimensions in mm)
08.06.2000.
TFS 468 B - 2/4
Max. 3,5
1
2,54 ± 0,2
3x2,54 = 7,62 ± 0,2
3,0 ± 0,5
0,45 ± 0,2 Dia.
1 – Input
2 – Ground
3 – Ground
4 – Output
S 468 B M22
Max. 11,4
Max. 4,8
150 ohm 1
S 468 B M22
4 150 ohm
Datecode:
K
L
M
.......
Year+week
1998
1999
2000
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,035 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(steady state)
90 % to 95 % rel. humidity, 55 °C, 10 days;
DIN IEC 68 - 2 - 30
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on sheet 4;
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No
liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.