TFS246M Datasheet, PDF (2/4 Pages) Vectron International, Inc – Filter Specification

tfs246m.doc
version 1.5
06.01.02
______________________________________________________________________________________________________
VI TELEFILTER
Filter Specification
TFS 246 M - 2/4
______________________________________________________________________________________________________
Construction, pin configuration and 50 Ω matching network
(All dimensions in mm)
246 M
K7
Pin 1
Pin 2
Pin 3
Pin 4
Sym. Output
Sym. Output
External Coil
Package Ground
50 Ohm Test circuit 1
LB-IN
L1
6
Pin 5
Pin 6
Pin 7
Pin 8
Sym. Input
Sym. Input
Ground
Package ground
1
L3
LB-OUT
C1
SAW
C2
L2
50 Ohm Test circuit 2
C1
LB-IN
5
2
3
4, 7, 8
L5
6
1
L1
SAW
L2
L4
C3
LB-OUT
5
2
C2
3
C4
4, 7, 8
L3
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
100g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.