TC140 Datasheet, PDF (2/2 Pages) Vectron International, Inc – Temperature Compensated Crystal Oscillators (TCXOs)

Temperature Compensated Crystal Oscillators (TCXO’s)
TC-140 (R Series)
Outline Drawing
Frequency Adjust Options
.508
(0.20)
5.842
(0.23)
min
2.54
(0.10)
38.887
(1.531)
max
1.270
(0.05)
25.4
(1.000)
12.70
(0.500)
Frequency Adjust
Access. For Mechanical
Adjust Units only.
13.462
(0.53)
max
.508
(0.02)
0.762 _{DIA. 5 PLACES}
(.030)
38.887
(1.531)
max
12.70
(0.500)
CL
25.4
(1.000)
3
4
5
2
1
CL
20.320
(0.800)
10.160
6.350 ^(0.400)
(0.250)
mm!
(in)
A ±3 ppm minimum via internal mechanical adjust
positive slope.
B ±3 ppm minimum via external voltage, 0 to +5 Vdc
F No Frequency Adjust. Standard option for ±1 ppm
and ±4.6 ppm for 10 years units. However, this
option is available with all Stability options. No user
adjustment is needed. Unit is Plug-N-Play.
Note: This option is ideal for high volume applica-
tions where minimal set-up and testing is desired.
Pin Out Information
Pin Function
1
Output
2
Supply (Vdd)
3
Gnd
4
Freq. Adjust/NC
5
Gnd
Output Levels
Output Option A
B
Output
HCMOS/ACMOS 10 TTL
Voh min..
0.8 (Vdd)
+2.4 Vdc
Vol max.
+0.5 Vdc
+0.5 Vdc
Load (typical) 100 k ohm // 10 pF 10 TTL
Symmetry
50% ±10%
50% ±10%
Rise/Fall Time 5 ns max.
10 ns max.
Sine
Output Option G
J
Output
Sinewave
Sinewave
Level
0 dBm to +6 dBm +7 dBm to +13 dBm
Load
50 ohm
50 ohm
Harmonics/subs -20 dBc max.
-20 dBc max.
Other Spurious -60 dBc max.
-80 dBc max.
Ordering Information
TCXO
TC 140 C A B
4PM F 12.80
MHz
Product Family
TC = TCXO
Package
140 = package
Supply Voltage
B = 12 Vdc ±5%
C = 5.0 Vdc ±5%
Output
A = HCMOS/ACMOS
B = 10 TTL
G = 0 dBm / 50 ohm
J = +7 dBm / 50 ohm
Output Frequency
0.5 MHz to 160 MHz
Frequency Adjust Options
A = Internal Mech. Adjust (standard)
B = External Voltage Adjust
F = No Frequency adjust (see above)
Temperature Stability
B-1PM = ±1.0 x 10^-6 over 0°C to +50°C, 10 years (no freq. adjust)
B-207 = ±2.0 x 10^-7 over 0°C to +50°C
B-ST3 = Stratum 3 over 0°C to +50°C
B-4PM = ±4.6 x 10^-6 over 0°C to +50°C, 10 years (no freq. adjust)
C-1PM = ±1.0 x 10^-6 over 0°C to +70°C, 10 years (no freq. adjust)
C-ST3 = Stratum 3 over 0°C to +70°C
C-507 = ±5.0 x 10^-7 over 0°C to +70°C
C-4PM = ±4.6 x 10^-6 over 0°C to +70°C, 10 years (no freq. adjust)
F-106 = ±1.0 x 10^-6 over -40°C to +85°C
F-4PM = ±4.6 x 10^-6 over -40°C to +85°C, 10 years (no freq. adjust)
Note: Other stabilities are available upon request.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
61