English
Language : 

OX-0420-AEE-108 Datasheet, PDF (2/4 Pages) Vectron International, Inc – Oven Controlled Crystal Oscillator
Performance Specifications
Parameter
Supply voltage (Standard-Opt A)
Supply voltage (Standard-Opt B)
Oven Power Consumption
Signal
Load
Output Power
Harmonics
Tuning Range
Tuning Range
Linearity
Tuning Slope
Control Voltage Range
Phase Noise3 (@5 MHZ)
(under static conditions - no vibration)
Phase Noise3 (@ 10 MHZ)
(under static conditions - no vibration)
Weight
Supply voltage (Vs)
Output Load
Operable temperature range
Storage temperature range
Shock - operating
Shock - endurance
Sine Vibration - operating
Sine Vibration - endurance
Random Vibration - operating
Random Vibration - endurance
Seal
Min Typ Max Units
Condition
Supply Voltage (Vs)
14.25 15.0 15.75 VDC
18 & 24 VDC options available
11.4 12.0 12.6 VDC
18 & 24 VDC options available
6.0 Watts
3.0 Watts
RF Output
during warm-up
steady state @ +25°C
Sinewave
50
ohm
+7.0
dBm
-30
dBc
Frequency Tuning (Internal Mechanical)
50 ohm load
50 ohm load
±0.75 ±1.0 ±2.0 ppm
Frequency Tuning (EFC - optional)
±0.2 ±0.5 ±1.0 ppm
20
%
Internal mechanical
Electronic frequency control
Positive
0.0 2.5 5.0
VDC
Additional Parameters1
-115 -105 dBc/Hz
-140 -137 dBc/Hz
-155 -152 dBc/Hz
-166 -163 dBc/Hz
-168 -165 dBc/Hz
-100 -95 dBc/Hz
-133 -127 dBc/Hz
-155 -152 dBc/Hz
-166 -163 dBc/Hz
-168 -165 dBc/Hz
100
g
Absolute Maximum Ratings
28
VDC
short
open ohm
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
-55
+85
°C
-55
+125
°C
Environmental Specifications
Mil-STD-202, Method 213, Condition J, 30G, 11 ms half-sine impulse
Mil-STD-202, Method 213, Condition C, 100G, 11 ms half-sine impulse
Mil-STD-202, Method 204, Condition C, 10 G to 2 kHz
Mil-STD-202, Method 204, Condition D, 20 G to 2 kHz
Mil-STD-202, Method 214, Condition C, 10.7 Grms to 2 kHz
Mil-STD-202, Method 214, Condition H, 34 Grms to 2 kHz
Mil-STD-202, Method 112, Condition D (not applicable to units with SMA connector)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com