VS700 Datasheet, PDF (1/7 Pages) Vectron International, Inc – VOLTAGE CONTROLLED SAW OSCILLATOR

Vcc
COutput Output
SAW
Vc
OD
Gnd
VS-700
Voltage Controlled SAW Oscillator
Features
• Industry Standard Package, 5.0 x 7.5 x 2.5 mm
• Output Frequencies from 500 MHz to 850 MHz
• 3.3 V Operation
• Low Jitter < 0.20 ps-rms across 50 kHz to 80 MHz
• LV-PECL Configuration with Fast Transition Times
• Complementary Outputs
• Output Disable Feature
• Fully Compatible for Lead Free Assembly
Applications
PLL circuits for Clock Smoothing and Frequency Translation
Description
• 1-2-4 Gigabit Fibre Channel
• 10 Gigabit Fibre Channel
• 10GbE LAN / WAN
• OC-192
• SONET / SDH
Standard
INCITS 352-2002
INCITS 364-2003
IEEE 802.3ae
ITU-T G.709
GR-253-CORE Issue3
Description
The VS-700 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW filter.
The SAW filter is a high-Q quartz device that enables the circuit
to achieve low phase jitter performance over a wide operating
temperature range. The oscillator is housed in a hermetically
sealed leadless surface mount package offered on tape and
reel. It has an output disable to facilitate on-board testing.
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Page 1 of 7
Tel: 1-88-VECTRON-1
Website: www.vectron.com
Rev: 17May04