|
VS-500_06 Datasheet, PDF (1/8 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator | |||
|
VS-500
Voltage Controlled SAW Oscillator
Features
⢠Improved High Performance ASIC
⢠Industry Standard Package, 9 x 14 x 4.5 mm
⢠Output Frequencies from 155 MHz to 850 MHz
⢠3.3 V or 5.0 V Operation
⢠At 155.52 MHz, Jitter < 0.50 ps-rms (12 kHz to 20 MHz)
⢠At 622.08 MHz, Jitter < 0.30 ps-rms (50 kHz to 80 MHz)
⢠LV-PECL, PECL, or ECL Configurations
⢠Complementary Outputs
⢠Output Disable Feature
Product is free of lead and compliant to
EC RoHS Directive
Vcc
COutput Output
SAW
Applications
PLL circuits for Clock Smoothing and Frequency Translation
Description
Standard
⢠10G Fibre Channel
INCITS/T11 Project 1413-D
⢠10GbE LAN / WAN IEEE 802.3ae
⢠OC-192
ITU-T G.709
⢠SONET / SDH
GR-253-CORE Issue3
Description
Vc
OD
Gnd
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
The VS-500 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW
filter. This resonator is a high Q quartz device that enables
the circuit to achieve low phase jitter performance over a wide
operating temperature range. The oscillator is housed in a
hermetically sealed J-lead surface mount package offered on
tape and reel. It has an output disable to facilitate on-board
testing.
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page 1 of 8
Rev: 11Apr06
|
▷ |