VCO-600A Datasheet, PDF (1/6 Pages) Vectron International, Inc – Voltage Controlled Saw Oscillator

Product Data Sheet
Not Recommended For New Designs
VCO-600A
Voltage Controlled Saw Oscillator
The VCO600A Voltage Controlled SAW Oscillator
Features
• Output Frequency @ 155 MHz to 1 GHz
• Low jitter, 3pS rms for 622.080 MHz version and
6pS rms (typical) for 155 MHz version
• Ideal for clock smoothing, frequency translation,
clock and data retiming applications
• 10K ECL, PECL logic levels with fast
transition times
• Complementary outputs
• Low profile, surface mount package
• Output disable feature
• Low-frequency clock through feature
• Miniature hermetically sealed ceramic surface-
mount package (SO-28, approx.0.7in. x 0.3in)
Applications
• OC192/OC48/OC12 Clock Smoothing
• Frequency Translation
Description
The VCO600A is a SAW stabilized, voltage controlled
oscillator that operates at the fundamental frequency
of the internal SAW filter. This filter is a high stability,
high-Q quartz device that enables the circuit to
achieve low phase jitter performance over a wide
operating temperature range. The oscillator is housed
in a hermetically sealed 28-lead surface mount
package. It has a unique output disable and clock
through feature to facilitate on-board testing.
Vectron International 267 Lowell Rd, Hudson NH 03051-4916 Tel:1-88-VECTRON-1 e-mail: [e-mail]