TX-7030-EAP-1470-20M000 Datasheet, PDF (1/4 Pages) Vectron International, Inc – Nominal frequency (f0)

TX-7030-EAP-1470-20M000
TCXO
Nominal frequency (f0)
20 MHz
Frequency stabilities
Parameter
Frequency stability
Operating temp. range
Over all (df/f0)
-4.6 to 4.6 ppm
vs. operating temp. range (df/f@25 °C)
-0.14 to 0.14 ppm
0 ... 50 °C
Parameter
Value
Condition
initial tolerance (df/f0)
-1 to 1 ppm
@25 °C
vs. supply voltage change (df/f)
-0.2 to 0.2 ppm
static; 3.3 V ±5 %
vs. load change (df/f)
-0.1 to 0.1 ppm
static; Load ± 5 %
vs. aging / 20 years (df/f)
<± 2.5 ppm
@ 40 °C
Holdover 24 h
± 0.37 ppm
over 24 hours
Stratum 3 per GR-1244-CORE: <±4.6ppm for all causes @ 20 years aging incl. hold over
RF output
Parameter
Signal
Load
Fan out
Rise Time
Fall Time
Duty cycle
V Low
V High
Value
LVCMOS
15 pF ±10 %
3
< 5 ns
< 5 ns
40 / 60 %
x < 0.3 V
x>3V
Condition
@ 10 to 90 %Vout
@ 90 to 10 %Vout
@ 1.65 V
Supply voltage
Parameter
Supply voltage (Vs)
Current consumption steady state
Value
3.3 V ± 5 %
< 6 mA
Condition
@ Vsnom & 25 °C
Additional Parameters
Parameter
Typ.
Max.
Additional information
This SMD oscillator is designed only for pick and place/reflow soldering
process. Manual soldering may damage the part and therefore not
recommended for the mounting of this oscillator.
Processing & Packing
handling&processing note
Condition
Additional environmental conditions
Sealing test A
nicht dicht (not hermetically sealed)
Solderability
DIN IEC 68 T2-20 (Ta)
100% RoHS 6 compliant
Solvent resistance
EN 60068-2-45, Test xA
washable device
Absolute Maximum Ratings
Parameter
Min
Typ
Supply voltage (Vs)
Operable temperature range
-40
Storage temperature range
-55
Max
Units
6
V
85
°C
125
°C
Condition
Vectron International • Product Specifications TX-7030-EAP-1470
www.vectron.com
modified 2011-03-29 Index : 1 printed 2011-06-03 • page 1 of 4