TFS70H29A Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 70h29a.doc
VI TELEFILTER
Version 1.1
Filter specification
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
25
°C
0
dBm
1500 Ω || -6,7 pF
1700 Ω || -7,1 pF
TFS 70H29A
28.06.2004
1/5
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 70H29A is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB
filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tc_f is valid for both the reference frequency fc and the
frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating temperature range is not included in the
production tolerance scheme.
Data
typ. value
tolerance / limit
Insertion loss
(reference level)
Centre frequency
Passband
Bandwidth
1 dB
3 dB
40 dB
Relative attenuation
f_C
f_C ±
f_C ±
… f_C ±
1,4 MHz … f_C ±
1,5 MHz … f_C ±
ae
f_C
BW
arel
1,4 MHz
1,5 MHz
1,75 MHz
24,5 dB
70,01 MHz
3,20 MHz
3,60 MHz
5,22 MHz
0,4 dB
0,6 dB
2,5 dB
max.
26 dB
70,0 ± 0,09 MHz
f_C ± 1,75 MHz
min.
min.
max.
max.
max.
max.
3,0 MHz
3,5 MHz
5,6 MHz
0,8 dB
1 dB
3 dB
f_C ±
f_C ±
f_C ±
2,8
5
10
Group delay
MHz … f_C ±
MHz … f_C ±
MHz … f_C ±
5
MHz
10
MHz
30
MHz
mean value in PB
Group delay ripple within PB
50
dB
48
dB
56
dB
2,45 µs
40
ns
min.
min.
min
max.
min.
max.
40 dB
45 dB
50 dB
3 µs
2 µs
90 ns
Deviation from linear phase within PB
2,2 °
max.
4°
Triple transit response suppression
54
dB
-
Crosstalk attenuation compared to main signal
55
dB
-
Operating temperature range
OTR
-
- 40 °C ... + 85°C
Storage temperature range
-
- 55 °C ... + 85°C
Frequency inversion temperature
30
°C
-
Temperature coefficient of frequency
TCf **
- 0,04 ppm/K²
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f(Hz) = TCf(ppm/K) x (T-T₀)² x fTo(MHz).
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.