TFS70H24 Datasheet, PDF (1/4 Pages) Vectron International, Inc – Filter Specification

File name : TFS70H24.doc
VI TELEFILTER
Filter Specification
Version 1.0
25.01.2001
TFS 70H24 - 1/4
1. Measurement condition
Ambient temperature TA:
Input power level:
Terminating impedances at fc:
Q-value of matching elements:
Source impedance:
Load impedance:
23 °C
0 dBm.
for input:
for output:
70...100
50 Ω
50 Ω
T.B.M. Ω  T.B.M.
T.B.M. Ω  T.B.M.
2. Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 70H24 is the minimum of the pass band attenuation amin. The minimum of the pass
band attenuation amin is defined as the insertion loss ae. The reference frequency fc is the arithmetic mean value of the upper and lower
frequencies at the 3 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tcf is valid both for the
reference frequency fc and the frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating
temperature range is not included in the production tolerance scheme
Data
Insertion loss (Reference level) ae
Centre frequency fc at ambient temperature TA (fCAT)
Pass band (PB) at ambient temperature TA:
Amplitude ripple (p-p):
fC ..... fC ± 0,40 MHz
Bandwidth at ambient temperature:
0,5 dB - band width
1 dB - band width
3 dB - band width
20 dB - band width
40 dB - band width
45 dB - band width
Relative attenuation
arel
fC ± 0,40
fC ± 0,45
fC ± 1,15
fC ± 2,50
fC _........ fC ± 0,40
MHz ..... fC ± 0,45
MHz ..... fC ± 0,50
MHz ..... fC ± 2,50
MHz ..... fC ± 30
MHz
MHz
MHz
MHz
MHz
Group delay ( mean value in PB ):
Group delay ripple in PB (p-p):
Deviation from linear phase in PB (p-p):
Input VSWR (S11) in PB :
Output VSWR (S22) in PB :
Triple transit attenuation compared to main signal
Crosstalk
Substrate material
Frequency inversion temperature ( To )
Temperature coefficient of frequency ( Tcf )
Frequency deviation of fc over temperature: * )
Operating temperature range
Storage temperature range
typical values
20 dB
70,01 MHz
0,4 dB
tolerance / limit
max. 24 dB
70 ± 0,07 MHz
fC - 0,5 MHz.....fC + 0,5 MHz
max. 0,5 dB
0,90 MHz
1,12 MHz
1,33 MHz
1,90 MHz
2,18 MHz
2,30 MHz
min. 0,80 MHz
min. 0,90 MHz
min. 1,00 MHz
max. 2,30 MHz
0,4 dB
0,7 dB
1,8 dB
50...55 dB
55...65 dB
3,63 µs
130...145 ns
2,5°...3° ( r.m.s. 0,6° )
max. 0,5 dB
max.
max.
min.
min.
1 dB
3 dB
40 dB
45 dB
max. 4,0 µs
max. 150 ns
max. 4°
47...50 dB
48...53 dB
Quartz
20°...40° C
-0,045 ppm/K²
∆fc(Hz) = Tcf(ppm/K) x (T - To)² x fTo (MHz)
- 25 °C ... + 80 °C
- 40 °C ... + 85 °C
* ) fTo is reference frequency fc at frequency inversion temperature (To )
Generated:
Dunzow W.P.
Checked/Approved:
Dr. Bert Wall
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.