TFS611 Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 611.doc
Vectron International
Version 1.3
Filter specification
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
25
°C
0
dBm
250 Ω || -4,5 pF
210 Ω || -4,6 pF
TFS 611
14.08.2008
1/5
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 611 is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB
filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 611,0 MHz without any tolerance. The given values for both the
relative attenuation arel and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency fc is shifted due to the
temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss at ambient temperature
(reference level)
Nominal frequency
Centre frequency at ambient temperature
Relative attenuation
fc
fc ±
3
fc ±
4
fc ±
9
fc ± 100
… fc ±
MHz … fc ±
MHz … fc ±
MHz … fc ±
MHz … fc ±
3
3,5
9
100
500
Operating temperature range
Storage temperature range
Temperature coefficient of frequency
ae
f_N
f_C
arel
MHz
MHz
MHz
MHz
MHz
OTR
TCf **
typ. value
5,6 dB
-
611,0
MHz
0,5
1,5
5
47
60
-
-
-18
dB
dB
dB
dB
dB
ppm/K
tolerance / limit
max.
6 dB
611 MHz
±
0,5 MHz
max.
max.
min.
min.
min.
1 dB
3 dB
3 dB
40 dB
50 dB
- 40 °C ... + 85 °C
- 40 °C ... + 85 °C
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆f_c (Hz) =T_Cf(ppm/K)x(T₀-T_A)xf_cat(MHz)
Generated:
Checked / Approved:
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.