English
Language : 

TFS400K Datasheet, PDF (1/5 Pages) Vectron International, Inc – Preliminary Specification
tfs400k.doc
VI TELEFILTER
version 3.2
Preliminary Specification
01.12.2003
TFS 400 K
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
External coil:
23
°C
10
dBm
375
-1.9 pF
375
-1.9 pF
47 nH
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS400K is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1 dB
filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 400 MHz without tolerance. The given values for the relative
attenuation arel and for the group delay ripple have to be reached at the frequencies given below even if the centre frequency fc is shifted due to the
temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
typ. value
tolerance / limit
Insertion Loss
(reference level)
ae
4,5 dB
max.
6,5 dB
Nominal Frequency
Bandwidth
3 dB
fN
400,04 MHz
BW
T.B.D.
400
MHz
-
Relative Attenuation
fN
... fN ±
fN ± 500
fN ± 700
fN ±
1
kHz ... fN ±
kHz ... fN ±
MHz ... fN ±
arel
82,5 kHz
700 kHz
1 MHz
13 MHz
0,4 dB
28
dB
43
dB
50
dB
max.
min.
min.
min.
1
dB
15
dB
27
dB
40
dB
Group Delay Ripple
fN ± 82,5 kHz
0,6 µs
max.
1
µs
Operating Temperature Range
OTR
-
Storage Temperature Range
-
-40 °C ... + 85 °C
- 40 °C ... + 85°C
Frequency Inversion Temperature
20
°C
-
Temperature Coefficient of Frequency
TCf **
-0,036 ppm/K²
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. These values have to be
confirmed by balanced s-parameter measurement.
**) f(Hz) = TCf(ppm/K) x (T-T0)² x fTo(MHz).
Generated:
Checked / Approved:
TELEFILTER GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.