TFS40 Datasheet, PDF (1/3 Pages) Vectron International, Inc – Filter specification

Filename: tfs 40.doc
Vectron International
Version 2.0
Filter specification
TFS 40
26.05.2010
1/3
1. Measurement condition :
Ambient temperature T_A:
Source impedance at fc:
Load impedance at fc:
23 °C
50 Ω ⎟⎢ 0 pF.
2 kΩ ⎟⎢ 3 pF.
2. Characteristics :
Remark: Reference level for the relative attenuation arel of the TFS 40 is the minimum of the pass band attenuation amin. The minimum of the pass
band attenuation amin is defined as the insertion loss ae. The reference frequency fc is the arithmetic mean value of the upper and lower frequencies
at the 10 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tc_f is valid both for the reference
frequency fc and the frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating temperature
range is not included in the production tolerance scheme.
Data
Insertion loss (Reference level)
ae
Centre frequency fc at ambient temperature T_A (f_CAT)
Pass band at ambient temperature T_A: ( PB )
Bandwidth at ambient temperature T_A :
3 dB - bandwidth
39 dB - bandwidth
Relative attenuation
arel
f_C
............ ^fC ^{± 400}
f_C - 10 MHz ..... f_C - 1,5
f_C + 1,5 MHz ..... f_C + 10
kHz
MHz
MHz
Group delay ( mean value in PB ):
Group delay ripple in PB (p-p):
Temperature coefficient of frequency ( Tc_f )
Frequency deviation of fc over temperature: * )
Permissible DC voltage VDC
Permissible AC voltage Vpp
Operating temperature range
Storage temperature range
typ. value
10 dB
40,04 MHz
1 MHz
tolerance / limit
max. 13 dB
40,04 ± 0,05 dB
f_C - 400 kHz.....f_C + 400 kHz
min. 0,8 MHz
max. 3,0 MHz
-
44...50 dB
40...45 dB
max. 3 dB
min. 40 dB
min. 38 dB
1,3 µs
µs
max. 450 ns
- 72 ppm/K
∆fc(Hz) = Tc_f(ppm/K) x (T - T_A) x f_CAT (MHz)
-
12 V
-
10 V
5 °C ... + 55 °C
- 25 °C ... + 80 °C
Generated:
Checked/Approved:
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.