TFS365B Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 365b.doc
VI TELEFILTER
Version 1.4
Filter specification
TFS 365B
24.08.2004
1/5
Measurement condition
Ambient temperature T_A:
Input power level:
Terminating impedances at fc *):
23 °C
0 dBm
input: 590 Ω// -6,6 pF
output: 260 Ω// -5,5 pF
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 365B is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 0,8 dB
filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 365 MHz without any tolerance. The given values for both the
relative attenuation arel and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency fc is shifted due to the
temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
typ. value
tolerance / limit
Insertion loss
(reference level)
ae
9 dB
max. 14,5 dB
Nominal frequency
fN
Centre frequency at ambient temperature fc
-
365,025 MHz
365 MHz
-
Pass band
PB
Amplitude ripple within PB
In band ripple
(in any 112,5 kHz increment within the PB)
-
0,3 dB
0,15 dB
fN ±
max.
max.
0,5 MHz
0,8 dB
0,5 dB p-p
Relative attenuation
fN
......... fN ± 0,5
fN ± 1,2 MHz ......... fN ± 1,5
fN - 3,0 MHz ......... fN - 1,5
fN + 1,5 MHz ......... fN + 3,2
0,3 MHz ......... fN - 3
fN + 3,2 MHz .........
1,5
arel
MHz
MHz
MHz
MHz
MHz
GHz
0,3 dB
40 dB
44 dB
43 dB
55 dB
54 dB
max. 0,8 dB
min. 35 dB
min. 40 dB
min. 40 dB
min. 50 dB
min. 50 dB
Group delay at fN
Group delay ripple in PB
(in any 112,5 kHz increment within the PB)
1,6 µs
90 ns
max. 2 µs
max. 120 ns
Phase linearity in PB
(in any 112,5 kHz increment within the PB)
1 deg p-p
max. 5 deg p-p
Input power level
-
max. 20 dBm**)
Operating temperature range
-
- 40 °C ... + 70 °C
Storage temperature range
-
- 40 °C ... + 100 °C
Turnover temperature T_o
22 °C
-
Temperature coefficient of frequency TC_f***
-0,04 ppm/K²
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team.
**) This power level is only allowed for short term operation (10% of the life time), the max. input power for continuous operation is max.15dBm only
***) ∆f(Hz) = TCf(ppm/K²) x (T-T₀)² x fTo(MHz)
generated:
checked / approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.