English
Language : 

TFS341B Datasheet, PDF (1/4 Pages) Vectron International, Inc – Filiter specification
t_fs_3_41_b_.d_o_c_________________________________________________________V_e_r_s_io_n_2_.0_______________________0_6_.0_1_.0_2___
V__I__T__E_L__E__F_I_L_T__E_R_______________________F_i_l_it_e__r__s_p__e_c__if_i_c_a__t_io__n__________________T__F_S___3__4_1__B________1__/4_
Measurement condition
Ambient temperature:
Input power level:
Q-value of matching coils:
terminating impedances
Source:
Load:
25 ± 5
5±2
25
°C
dBm
630 Ω || -5.2 pF
620 Ω || -5.0 pF
Construction and pin connection
see page 2
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 341 B is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the
2 dB filter attenuation level relative to the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to
be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the
operating temperature range and due to a production tolerance for the centre frequency fo.
Data
typ. value
limit
______________________________________________________________________________________________________
I_n_s_e_r_ti_o_n__lo_s_s____________a_e_=_a_m__in______________________________7_,5__d_B_______________________±_1__d_B____________
_N_o_m__in_a_l_f_re_q__u_e_n_c_y_______fN____________________________________-______________________________3_4_1_,0___M_H_z_____
Relative attenuation
arel
fN ............................. fN ± 100 kHz
fN ± 100 kHz ... fN ± 200 kHz
-
max. 0,5 dB
-
max. 0,8 dB
fN ± 600 kHz ... fN ± 1,8 MHz
-
min. 2,0 dB
fN ± 1,8 MHz ... fN ± 2,0 MHz
-
min. 30 dB
fN ± 2,0 MHz ... fN ± 2,4 MHz
-
min. 30 dB
fN ± 2,4 MHz ... fN ± 4,1 MHz
-
min. 30 dB
fN ± 4,1 MHz ... fN ± 4,5 MHz
-
min. 30 dB
fN ± 4,5 MHz ... fN ± 170 MHz
-
min. 30 dB
1000 MHz ... 1050 MHz
-
min. 35 dB
______________________________________________________________________________________________________
VSWR ratio
at source and load impedance,fN - 200 kHz ... fN + 200 kHz -
max. 2 : 1
_______a_t_5_0_Ω__,_a_t_fN_______________________________________<__=_1_4__2_) ________________________________________
Group delay ripple GD
_______fN__-_2_0_0_k_H__z_._.._f_N__+_2_0_0__k_H_z_____________-__________________________________________m_a_x_.___5_0____n_s______
Input power level
-
max. + 10 dBm
______________________________________________________________________________________________________
Permissible DC voltage
-
max. 10 V
______________________________________________________________________________________________________
Operating temperature range
0 °C ... + 85 °C
Storage temperature range
- 30 °C ... + 85 °C
______________________________________________________________________________________________________
Temperature coefficient
TC
- 0,036 ppm/K² 1)
______________________________________________________________________________________________________
Frequency inversion temperature To
40
°C
-
______________________________________________________________________________________________________
Note 1) - ∆f (Hz) = TC (ppm/K²) x (T - To)² x FTo (MHz)
Note 2) Design goal is VSWR50 Ω =8; limit is VSWR50 Ω = 14 (typical value)
Generated:
Checked / approved:
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: tft@telefilter.com
E-Mail: vti@vtinh.com
______________________________________________________________________________________________________
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.