TFS270A1 Datasheet, PDF (1/4 Pages) Vectron International, Inc – SAW filter specification

T_{_}F_{_}S_{_}2_{_}7_{_}0A_{_}1_{_}.d_{_}o_{_}c_{_________________________________________________________________________________________}V_{_}e_{_}rs_{_}io_{_}n_{__}1_{_}.0_{_}
V_{__}I_{__}T_{_}E_{__}L_{_}E_{__}F_{_}I_{_}L_{__}T_{_}E_{__}R_{_________________________}S_{_}A_{__}W_{___}f_{_}i_{_}lt_{_}e_{__}r_{_}s_{__}p_{_}e_{__}c_{_}i_{_}f_{_}ic_{__}a_{_}t_{_}i_{_}o_{_}n_{________________}T_{_}F_{__}S_{__}2_{_}7_{__}0_{_}A_{__}1_{_______}1_{__}/_{_}4_{_}
Measurement condition
Ambient temperature: 23 °C
Input power level:
0 dBm
Terminating impedance input:
510 Ω || -1.75 pF
Terminating impedance output: 510 Ω || -1.75 pF
ext. coil pin4:
82 nH
Construction
see page 2
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 270A1 is the minimum of the pass band attenuation amin. The minimum
of the pass band attenuation amin is defined as the insertion loss ae.The nominal frequency fN is fixed on 270,000 MHz without
tolerance. The values of the pass band ripple and the relative attenuation arel are guaranteed in the whole operating temperature
range. The frequency shift of the filter in the operating temperature range is included in the measurement tolerance scheme.
Preliminary Data
typ. value
tolerance / limit
__________________________________________________________________________________________________________
Insertion loss
ae = amin
3
dB
max 5
dB
(Reference level)
__________________________________________________________________________________________________________
_^N_^o_^m__ⁱⁿ_^a_^l_^f_^re_^q__^u_^e_ⁿ_^c_^y_______^fN____________________________________-____________________________2_7_0_,0_0_0___M_H_z_________
Pass band ripple
fN - 70 kHz ... fN + 70 kHz
fN - 90 kHz ... fN + 90 kHz
0,5
max 2
dB
1,0
max 3
dB
__________________________________________________________________________________________________________
Relative attenuation
arel
270,0 MHz ± 400 kHz ... 270,0 MHz ± 600 kHz
270,0 MHz ± 600 kHz ... 270,0 MHz ± 1,0 MHz
270,0 MHz ± 1,0 MHz ... 270,0 MHz ± 30 MHz
30
dB
40
dB
50
dB
min 20
dB
min 27
dB
min 40
dB
__________________________________________________________________________________________________________
Group delay distortion GDD
270,0 MHz ± 70 kHz
0,5 µs
max 2
µs
__________________________________________________________________________________________________________
Operating temperature range
- 20 °C ... + 85 °C
Storage temperature range
- 30 °C ... + 85 °C
__________________________________________________________________________________________________________
_^T_^e_^m_^p_^e_^r_^a_^t_^u_^re__^c_^o_^e_^f_^fi_^c_^ie_ⁿ_^t_^o__^f _^fr_^e_^q_^u_^e_ⁿ_^c_^y____^T_^C_^f____________________-__0_,0_3_6__p_p_m__/K__² ___________________-_________________
Frequency inversion temperature
+ 25
°C
-
__________________________________________________________________________________________________________
generated:
checked/approved:
__________________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
______________________________________________________________________________________________________
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.