TFS244A Datasheet, PDF (1/4 Pages) Vectron International, Inc – Filter specification

t_{_}fs_{_}2_{_}44_{_}A_{_}.D_{_}O_{__}C_{________________________________________________________________}v_{_}e_{_}rs_{_}i_{_}on_{__}1_{_}.1_{__________________}0_{_}1_{_}/_{_}9_{_}9_{_}
V_{__}I_{__}T_{_}E_{__}L_{_}E_{__}F_{_}I_{_}L_{__}T_{_}E_{__}R_{_______________________}F_{__}i_{_}lt_{_}e_{__}r_{__}s_{_}p_{__}e_{_}c_{__}if_{_}i_{_}c_{_}a_{__}ti_{_}o_{__}n_{__________________}T_{__}F_{_}S_{___}2_{__}4_{_}4_{__}A_{_______}1_{_}/_{_}4_{__}
Measurement condition
Ambient temperature:
Input power level:
Source impedance:
Load impedance:
Ext.coil:
23 °C
0 dBm
340 Ω || -5 pF
340 Ω || -5 pF
116 nH
Construction and pin connection
see page 2
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 244,0 is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 3
dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 244,0 MHz without tolerance. The given values for
the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted
due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.
Preliminary Data
typ. value
tolerance / limit
______________________________________________________________________________________________________
Insertion loss
ae = amin
3,2 dB
max 5
dB
(Reference level)
______________________________________________________________________________________________________
N_{__}o_{_}r_{_}m_{_}i_{_}n_{_}a_{_}l _{_}f_{_}r_{_}e_{_}q_{_}u_{_}e_{_}n_{_}c_{_}y_{______}fN_{________________________________________________________________2_4_4_,0_____M_H_z_____}
Relative attenuation
arel
244,0 MHz ± 90 kHz
-
max 3
dB
244,0 MHz ± 400 kHz ... 244,0 MHz ± 600 kHz
-
244,0 MHz ± 600 kHz ... 244,0 MHz ± 800 kHz
-
244,0 MHz ± 800 kHz ... 244,0 MHz ± 1,6 MHz
-
244,0 MHz - 1,6 MHz ... 244,0 MHz - 10 MHz
-
244,0 MHz + 1,6 MHz ... 244,0 MHz + 15 Mhz
-
244,0 MHz + 15 MHz ... 244,0 MHz + 25 Mhz
-
min 25
dB
min 36
dB
min 45
dB
min 50
dB
min 45
dB
min 50
dB
______________________________________________________________________________________________________
Group delay distortion GD
2,6
µs
-
244,0 MHz ± 70 kHz
1
µs
max 2
µs
______________________________________________________________________________________________________
Operating temperature range
- 40 °C ... + 85 °C
Storange temperature range
- 30 °C ... + 85 °C
______________________________________________________________________________________________________
Temperature coefficient of frequency TC
ca. - 0,036 ppm/K²
______________________________________________________________________________________________________
Frequency inversion temperature
+ 25°C
______________________________________________________________________________________________________
Generated:
Checked / approved:
______________________________________________________________________________________________________
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: [phone] / Fax: [phone]
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.