TFS211F Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 211f.doc
VI TELEFILTER
Version 1.2
Filter specification
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
23
°C
0
dBm
380 Ω || -11,5 pF
280 Ω || -10,6 pF
TFS 211F
19.01.2006
1/5
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 211F is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB
filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tc_f is valid for both the reference frequency fc and the
frequency response of the filter in the operating temperature range. The frequency shift of the filter in the operating temperature range is not included in the
production tolerance scheme.
Data
Insertion loss
(reference level)
Nominal frequency
Centre frequency
at ambient temperature
Passband
Bandwidth
1,5 dB
2,0 dB
Relative attenuation
f_C
… f_C ±
f_C ± 50 kHz … f_C ±
f_C ± 80 kHz … f_C ±
f_C
±
f_C
±
f_C
±
0,4 MHz … f_C ±
0,6 MHz … f_C ±
0,8 MHz … f_C ±
Absolute group delay within PB
50
80
100
0,6
0,8
20
Group delay ripple within PB
Return loss within PB
Intermodulation
Input power level
Permissible DC voltage
Operating temperature range
Storage temperature range
Frequency inversion temperature
Temperature coefficient of frequency
ae
f_N
f_C
PB
BW
arel
kHz
kHz
kHz
MHz
MHz
MHz
**
***
OTR
TCf ****
typ. value
4,2 dB
-
211
MHz
-
241
kHz
270
kHz
0,25 dB
0,6 dB
1
dB
30
dB
42
dB
48
dB
2,5 µs
350
ns
13
dB
- 75
dBc
-
-
-
-
23
- 0,036
°C
ppm/K²
tolerance / limit
max.
6,5 dB
211
± 25
MHz
kHz
f_c
± 100 kHz
min. ± 50 kHz
min. ± 80 kHz
max.
max.
max.
min.
min.
min.
max.
1,5 dB
2 dB
3 dB
25 dB
38 dB
46 dB
5 µs
max.
600
ns
min.
10 dB
max. - 62 dBc
max.
23 dBm
± 30 V
0 °C ... + 70°C
- 40 °C ... + 85°C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) f_in1 = 209,4 MHz; f_in2 = 210,2 MHz; P_in = -10 dBm and f_in1 = 211,8 MHz; f_in2 = 212,6 MHz; P_in = -10 dBm.
***) This power level is allowed for short time only (1% of life time), maximum input power for continuous operation is 14,5 dBm.
****) ∆f(Hz) = TCf(ppm/K²) x (T-T₀)² x fTo(MHz)
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.