TFS211-1 Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 211-1.doc
VI TELEFILTER
Version 1.8
Filter specification
TFS 211-1
03.08.2004
1/5
Measurement condition
Ambient temperature:
23 C
Input power level:
10 dBm
Terminating impedance:
Input:
280 II -3,7 pF
Output:
280 II -3,7 pF
External coil:
127 nH
The filter supports bursted GMSK and EDGE modulation.
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 211-1 is the filter attenuation at 211 MHz. The filter attenuation at 211 MHz is called insertion
loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion
loss ae. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre
frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the
centre frequency fc.
Data
typ. value
tolerance / limit
Insertion loss
(Reference level)
Centre frequency
Nominal frequency
ae = amin
fc
fN
4,5 dB
211,0 MHz
max 6,5 dB
211,0 MHz ± 25 kHz
211,0 MHz
3dB Bandwidth
270
kHz
min 215
kHz
Relative attenuation
f_N
f_N ± 50
f_N ± 80
... f_N ±
kHz ... f_N ±
kHz ... f_N ±
f_N ± 200
f_N ± 400
f_N ± 600
f_N ± 800
kHz ... f_N ±
kHz ... f_N ±
kHz ... f_N ±
kHz ... f_N ±
arel
50
80
100
400
600
800
100
kHz
kHz
kHz
kHz
kHz
kHz
MHz
Group delay at fN
GD
Group delay ripple
fN ± 50 kHz
-
-
-
-
-
-
-
3,4 s
-
max 1,5 dB
max 2
dB
max 3
dB
min 3
dB
min 25
dB
min 35
dB
min 40
dB
max 5
s
max 1,0 s
Out of band intermodulation
Input signals at 211,8 and 212,6 MHz at +10 dBm
–71
dBm
-
Input signals at 210,2 and 209,4 MHz at +10 dBm
–71
dBm
-
Input power level
for less than 1 hour over life time
f_N ± 800
f_N ± 3
kHz ... f_N ± 3
MHz ... f_N ± 100
MHz
MHz
Return loss (S11/S22) fN ± 100 kHz
-
max 15
dBm
-
max 25
dBm
-
max 22
dBm
-
max 25
dBm
min 10
dB
Operating temperature range
Storage temperature range
Temperature coefficient of frequency
Frequency inversion temperature
ca. - 0,036 ppm/K
+ 20 C
- 5 C ... + 80 C
- 40 C … + 85 C
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.