TFS170G Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

Filename: tfs 170g.doc
VI TELEFILTER
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
Version 1.3
Filter specification
23
°C
0
dBm
86 Ω || -36 pF
98 Ω || -28 pF
TFS 170G
22.11.2004
1/5
Characteristics
Remark:
The reference level for the relative attenuation arel of the TFS 170G is the maximum attenuation in the pass band. The maximum attenuation in the pass
band is defined as the insertion loss ae. The nominal frequency f_N is fixed at 170,6 MHz without any tolerance or limit. The values of relative attenuation
arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the
production tolerance scheme.
Data
Insertion loss
ae
(Reference level)
Nominal frequency
f_N
Passband
PB
Pass band ripple
Centre frequency
Relative attenuation
arel
f_N ± 90 kHz ... f_N ±
f_N ± 0,2 MHz ... f_N ±
f_N ± 0,4 MHz ... f_N ±
f_N ± 0,6 MHz ... f_N ±
f_N ± 0,8 MHz ... f_N ±
f_N ± 1,6 MHz ... f_N ±
f_N ± 3 MHz ... f_N ±
f_N ± 5,8 MHz ... f_N ±
f_N ± 35 MHz ... f_N ±
f_N - 75 MHz ... f_N -
f_N + 75 MHz ...
200 kHz
0,4 MHz
0,6 MHz
0,8 MHz
1,6 MHz
3 MHz
5,8 MHz
35 MHz
75 MHz
170 MHz
2 GHz
Group delay variation in PB
VSWR in PB
Temperature coefficient of frequency Tc_f ****
Frequency inversion temperature T₀
Operating temperature range
Storage temperature range
typ. value
4,9 dB
-
-
0,3 dB
170,6 MHz
-0,1 dB
2 dB
23 dB
35 dB
45 dB
48 dB
55 dB
60 dB
65 dB
70 dB
70 dB
0,28 µs
1,6 : 1
-0,036 ppm/K²
45 °C
-
-
tolerance / limit
max. 8,0 dB
170,6 MHz
fN ± 90 kHz
max. 1,0 dB
-
min. -1
min. 1
min. 13
min. 27
min. 40
min. 43
min. 47
min. 50
min. 45
min. 40
min. 40
max. 1
dB**
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
µs
max. 2 : 1
-
-
- 10 °C .. + 85 °C
- 40 °C.. + 125 °C
Input power level :
-
max. 10,0 dBm
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) reference is max. loss in PB
***)∆f(Hz) = TCf(ppm/K) x (T-T₀)² x fTo(MHz)
Generated:
Checked / approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.