TFS167G Datasheet, PDF (1/5 Pages) Vectron International, Inc – Filter specification

TFS167G.doc
VI TELEFILTER
version 2.2
Filter specification
TFS 167 G
14.11.2003
1/5
Measurement condition
Ambient temperature:
23 C
Input power level:
0 dBm
Terminating impedances at fc *: input:
output:
Characteristics
325 // -8,0 pF
325 // -8,0 pF
Remark:
Reference level for the relative attenuation arel of the TFS 167G is the maximum of the pass band attenuation amax. The maximum of the pass
band attenuation amax is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower
frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed at 167,0 MHz without tolerance.
The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below even if the
centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production
tolerance for the centre frequency fc.
Data
typ. Value
Tolerance/Limitation
Insertion loss
ae
(Reference level)
1,4 dB
max. 3,0 dB
Nominal frequency
fN
Pass band
PB
Amplitude variation in PB
Amplitude ripple in PB
p-p
-
318 kHz
-
-
167,0 MHz
fN 75 kHz
max.
max.
1 dB
0,5 dB
Relative attenuation
fN 0,4
fN 0,6
fN - 20
fN + 20
fN +103
fN +105
MHz ... fN 0,6
MHz ... fN 20,0
MHz ... fN – 137
MHz ... fN + 103
MHz ... fN + 105
MHz ... fN + 833
arel
MHz
MHz
MHz
MHz
MHz
MHz
Absolute group delay in PB
Group delay ripple in PB
Intermodulation ratio
For two – 20dBm input signals
@ fN + 0,800 MHz and fN + 1,600
@ fN - 0,800 MHz and fN - 1,600
Input Return loss
Output Return loss
Input power level
MHz
MHz
9,0 dB
18,0 dB
40 dB
40 dB
65 dB
40 dB
1,71 µs
240
ns
-
18,0 dB
20,0 dB
-
min. 5 dB
min. 10 dB
min. 30 dB
min. 30 dB
min. 40 dB
min. 30 dB
max. 2,0 µs
max. 300 ns
min. 100 dB
min.
min.
max.
15,0 dB
10,0 dB
22 dBm
Temperature coefficient of frequency Tcf
Frequency inversion temperature
Operating temperature range
Storage temperature range
40 °C
-0,032 ppm/k²
-
-
-
-
- 5 °C .. + 85 °C
- 40 °C.. + 90 °C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
generated:
checked / approved:
TELEFILTER GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.