QF90-0-5200-04 Datasheet, PDF (1/1 Pages) Vectron International, Inc – Environment conditions: Corresponding to Vectron MIL standard

Specification for crystal filter:
1. General
1.1. Package:
QF 90.0-5200/04
23 November 20010
1.2. Type name:
1.3. Number of poles:
1.4. Operating temperature range:
1.5. Storage temperature range:
QF 90.0-5200/04
4
-20°C to +70°C
-40°C to +85°C
2. Electric values
2.1. Nominal centre frequency fo:
90.0 MHz
2.2. Pass band
2.2.1. Bandwidth between 3 dB - frequencies:
2.2.2. Ripple:
2.2.3. Insertion loss:
( measured on smallest attenuation in pass band )
> fo  26 kHz
< 1.0 dB at fo  20.0 kHz
< 5.0 dB
2.2.4. Group delay distortion:
< 5.0 µs at fo  12.0 kHz
2.3. Stop band
2.3.1. fo  65kHz
2.3.2. fo  200 kHz
2.3.3. 100 MHz……105 MHz
2.3.4. Spurious response fo + 200 kHz...fo +2500 kHz
> 30 dB
> 70 dB (except spurious )
> 90 dB
> 30 dB
2.4. Terminating impedance ( input and output ):
50  // 0 pF
2.5. Input power level for reference measurement:
0 dBm
Maximum input power level without destruction: +10 dBm
2.6. 3 rd order outband Intermodulation products ( IP3 )
test tones: fo  100 / fo  200 kHz
input power level: -5 dBm per tone
> +30 dBm ( 70dB down from both -5dBm test tones )
input power level: -15 dBm per tone
> +25 dBm ( 80dB down from both -15dBm test tones )
3. Marking:
manufacturer, date code
27S32693831
QF 90.0-5200/04
4. Environment conditions:
Corresponding to Vectron MIL standard
______________________________________________________________________________________
Edited by:
date: ________________________________ name: _____________________________