MX-041_14 Datasheet, PDF (1/5 Pages) Vectron International, Inc – Oven Controlled Crystal Oscillator

MX-041
Oven Controlled Crystal Oscillator
MX-041
Features
• SC-Cut resonator
• Frequency Range: 5 MHZ to 20 MHZ
• Low Package Height
• Temperature stability to 0.4 ppb
• Aging rate 0.1 ppb/day
• Frequency range 5 to 20 MHz
• Standard frequencies: 5, 10, 20 MHz
Applications
• CDMA2000, WiMax, LTE and UMTS Base Stations
• Test and Measurement Equipment
• Broadcast Reference Standard
Performance Specifications
Frequency Stabilities¹
(Stabilities listed for 10 MHz. For stabilities above 10 MHz values may degrade. Please contact factory)
Parameter
Min Typ Max Units
Condition
vs. operating temperature range (refer-
-0.2
enced to +25°C)
-0.4
-0.6
+0.2
ppb
+0.4
ppb
+0.6
ppb
0… +70°C
-20… +70°C
-40… +85°C (+5V version)
For better stability refer to the MX-042 datasheet.
Initial Tolerance
-50
+50
ppb
at time of shipment, nominal EFC
vs. supply voltage change
-0.1
+0.1
ppb
VS ± 5%
vs. load change
-0.1
+0.1
ppb
Load ± 5%
vs aging/ day
-1
+1
ppb
after 24 hours of operation
vs aging/ day
-0.1
+0.1
ppb
after 72 hours of operation
vs. aging / 1 year
-20
+20
ppb
after 72 hours of operation
vs. aging / year (following years)
-10
+10
ppb
vs. aging/ 10 years
-75
+75
ppb
after 72 hours of operation
Retrace²
-10
+10
ppb
Warm-up Time
Supply voltage (Standard)
Supply voltage (Option)
5
minutes
Supply Voltage (Vs)
4.75 5.0 5.25
VDC
11.4 12.0 12.6
VDC
to ± 10 ppb of final frequency (1 hour) @25°C
Vectron International • 267 Lowell Road, Unit 102, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com