MQF90.0-3000-10 Datasheet, PDF (1/1 Pages) Vectron International, Inc – Specification for monolithic crystal filter

Specification for monolithic crystal filter:
1. General
1.1. Case:
MQF 90.0–3000/10
01 February 2007
Terminate plate materials: Ni / Au
Ni > 2.0 µm
Au > 0.75 µm
1.2. Type name:
1.3. Number of poles:
1.4. Operating temperature range:
1.5. Operaable temperature range:
1.6. Storage temperature range:
MQF 90.0-3000/10
2
-20°C to +85°C
-40°C to +85°C
-55°C to +125°C
2. Electric values
2.1. Nominal centre frequency fo:
90.0 MHz
2.2. Pass band
2.2.1. Bandwidth between 3 dB - frequencies:
2.2.2. Ripple:
2.2.3. Insertion loss:
( measured on smallest attenuation in pass band )
> ± 15 kHz
< 0.5 dB at fo ± 7.5 kHz
< 1.0 dB
2.3. Stop band
2.3.1. fo ± 50 kHz
2.3.2. Alternate attenuation:
2.3.3. Spurious response:
2.4. Group delay:
fo ± 50 kHz…500kHz
fo ± 15 kHz
> 16 dB
> 30 dB
> 10 dB
< 6 µs
2.5. Intermodulation
2.5.1. frequency 1 / 2
2.5.2. frequency 3 / 4
2.5.3. input power level
2.5.4. IP3
2.6. Terminating impedance ( input and output ):
2.7. Nominal input power level
2.7.1 Maximum input power level
90.10 / 90.20
89.90 / 89.80
-10 dBm
> 30 dBm
3000 Ω // - 0.7 pF
-10 dBm
+ 5 dBm
3. Marking on the case:
M90A1
tft yyww
4. Environment conditions:
according to Telefilter CF001
____________________________________________________________________________________
Edited by:
date: _______________________ name: ________________________