C2260A1-0235-12M8 Datasheet, PDF (1/4 Pages) Vectron International, Inc – Nominal frequency (f0)

C2260A1-0235-12M8
TCXO
Nominal frequency (f0)
12.8 MHz
Frequency stabilities
Parameter
Frequency stability
Over all (df/f0)
-4.6 to 4.6 ppm
vs. operating temp. range (df/f@25 °C)
-0.28 to 0.28 ppm
Parameter
Value
initial tolerance (df/f0)
-1 to 1 ppm
vs. supply voltage change (df/f)
-0.3 to 0.3 ppm
vs. load change (df/f)
-0.1 to 0.1 ppm
vs. aging / 15 years (df/f)
<± 2.5 ppm
Holdover 24 h
± 0.37 ppm
overall stab. incl.: initial, temp., supply, load var. and aging 15 years
Operating temp. range
-40 ... 85 °C
Condition
@25 °C
static; 3.3 V ±5 %
static; Load ± 10 %
@ 40 °C
incl. temp. stab. and 24 h aging
RF output
Parameter
Signal
Load
Fan out
Rise Time
Fall Time
Duty cycle
V Low
V High
Spurious
Value
LVCMOS
15 pF ±10 %
3
< 9 ns
< 9 ns
45 / 55 %
x < 0.33 V
x > 2.97 V
<- 80 dBc
Condition
@ 10 to 90 %Vout
@ 90 to 10 %Vout
@ 1.65 V
Supply voltage
Parameter
Supply voltage (Vs)
Current consumption steady state
Value
3.3 V ± 5 %
< 6 mA
Condition
@ Vsnom & 25 °C
Additional Parameters
Parameter
Typ.
Max.
Phase Noise
-85
-110
-125
-135
Parameter
Value
Additional information
This SMD oscillator is designed only for pick and place/reflow soldering
process. Manual soldering may damage the part and therefore not
recommended for the mounting of this oscillator.
Processing & Packing
handling&processing note
Condition
dBc/Hz@10Hz
dBc/Hz@100Hz
dBc/Hz@1000Hz
dBc/Hz@10kHz
Condition
Additional environmental conditions
Sealing test A
nicht dicht (not hermetically sealed)
Solderability
DIN IEC 68 T2-20 (Ta)
100% RoHS 6 compliant
Solvent resistance
EN 60068-2-45, Test xA
washable device
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Units
Operable temperature range
-40
85
°C
Storage temperature range
-45
125
°C
Condition
Vectron International • Product Specifications C2260A1-0235
www.vectron.com
modified 2011-03-09 Index : 2 printed 2011-06-03 • page 1 of 4