3662-2 Datasheet, PDF (1/1 Pages) Vectron International, Inc – Vectorbord® Plugbordtm

CATALOG 127:CATALOG 126.qxd 4/15/2011 12:24 PM Page 57
plugbord^tm
system packaging products
Vectorbord^® Plugbord^tm
EELLEECCTTRROONNIICCSS && TTEECCHHNNOOLLOOGGYY,, IINNCC..
44 CONTACTS
3662 4.50”H X 6.50”Lx.062” TH
3662-2 4.5”H X 9.6”L X .062” TH
3662-5 4.5”H X 4.5”L X .062” TH
0.100” grid Gold-plated edge contacts only. 22
numbered edge contacts on front side; 22
including grounding contact on reverse side.
Bare prototype area board.
.042” diameter holes. 44 gold-plated contacts
(22 each side) on .156” centers.
16-Pin DIP= 50
Material: CEM-1
WW Terminals: T44, T46, T49, T68
Solder Connector: R644
WW Connector: R644-3C or R644-3F
WW Socket Pin: R32
Extender: 3690
Rec. Card Cage: CCK13
3682-2 4.50"H X 6.5"L X .062"TH
3682 4.5" X 9.6"L X 0.062"TH
0.100" grid. Gold-plated edge contacts with
Interleaved bus pattern on wiring side only.
Bus outline is traced on component side to
facilitate device placement. Unclad test point
area at top of board.
.042" diameter holes. 44 gold-plated contacts
(22each side) on .156" centers.
16-pin DIP Capacity: 3682-2= 24 3682=48
WW Terminals: T44, T46, T49, T68
Socket pin: R32 Solder Connector: R644
WW Connector: R644-3C or R644-3F
Extender: 3690
Card Cage: CCK 13; CCK14
Material: FR-4
3662A6 4.50"H X 6.5"L X .062"TH
0.100" grid. Gold-plated edge contacts with
overall ground plane on one side with 0.085"
diameter clearance around holes, no pads or
ground plane on component side. Row and
column legendes on both sides. Bare proto-
type area board.
.042" diameter holes. 44 gold-plated contacts
(22each side) on .156" centers.
16-pin DIP Capacity = 90
WW Terminals: T44, T46, T49, T68.
Socket pin: R32 Solder Connector: R644
WW Connector: R644-3C or R644-3F
Extender: 3690
Card Cage: CCK 13
Material: CEM-1
3662-9 4.50"H X 6.5"L X .062"TH
0.100" grid. Gold-plated edge contacts with
Pad-Per-Hole pattern; 0.085" diameter pads
both sides.
Voltage plane, ground plane, row and column
legends on both sides.
.042" diameter holes. 44 gold-plated contacts
(22each side) on .156" centers.
16-pin DIP Capacity = 48
WW Terminals: T44, T46, T49, T68
Socket pin: R32
Solder Connector: R644
WW Connector: R644-3C or R644-3F
Extender: 3690
Card Cage: CCK 13
Material: FR-4
3677 4.50”H x 9.60”L x .062” TH
3677-2 4.50”H x 6.50”L x .062”TH
0.100” grid 3-Hole Solder Pad (0.28” x 0.080”)
one side only. Voltage plane, ground plane,
row and column legends on both sides.
.042” holes not plated thru
22/44 contacts gold plated @.156” centers
16-Pin DIP: 3677 = 21 3677-2 = 12
Material: FR-4
WW Terminals: T44, T46, T49, T68
Solder Connector: R644
WW Socket Pin: R32
Extender: 3690
Rec. Card Cage: CCK14
WW Connector: R644-3
www.vectorelect.com
3682-4 4.50"H X 6.5"L X .062"TH
0.100" grid. Gold-plated edge contacts with
Interleaved bus pattern on wiring side and
overall ground plane on component side.
Unclad test point area at top of board.
.042" diameter holes. 44 gold-plated contacts
(22each side) on .156" centers.
16-pin DIP Capacity: = 24
WW Terminals: T44, T46, T49, T68
Socket pin: R32 Solder Connector: R644
WW Connector: R644-3C or R644-3F
Extender: 3690
Card Cage: CCK 13; CCK14
Material: FR-4
4112-5 4.50”Hx4.50”Lx.062” TH
4112-4 4.50”Hx6.50”Lx.062” TH
4112 4.50”Hx9.60”Lx.062” TH
0.100” grid Zig-Zag Buses with 3-hole solder pad
pattern on wiring side, overall Ground Plane pattern
on component side (0.085” dia. clearance around
holes) 3-hole pads are 0.280” x 0.080”.
Row and column legends.
.042” holes not plated thru. 44 gold-plated contacts
(22 each side) on .156” centers.
16-pin DIP Capacity: 4112-5 = 8 4112-4 = 25
4112 = 40
WW Terminals: T44,T46, T49, T68
Socket pin: R32
Solder Connector: R644
Extender: 3690
Card Cage: CCK12, CCK 13, CCK 14
Material: FR-4
PLUGBORD^tm “G” PATTERN
838WE 4.50”H x 6.50”Lx.062” TH
Alternating intersections of 0.100” designed for
mounting transistors. Solder plated edge contacts
only, 22 numbered edge contacts on front side; 22
including grounding contact on reverse side.
Bare prototype area for unrestricted component
placement.
.062” diameter holes, 44 solder plated edge card
connector contacts on .156” centers
Material: FR-4 Epoxy Glass
Push-In Terminal: T28
Solder Connector: R644
Extender: 3690, 3690-6
WW Connector: R644-3C
800-423-5659
57