TO519 Datasheet, PDF (1/1 Pages) Vanlong Technology Co., Ltd. – Temperature Compensated Crystal Oscillator

Clipped Sine SM TCXO
Temperature Compensated Crystal Oscillator
• Excellent frequency stability
• Miniature size, reflow soldering available
• Clipped sine output, tight specifications and an internal trimmer
• Suited for communications equipment, cellular radios, and
instrumentation.
TO519
Specifications:
Frequency Range:
10.000 MHz ~ 26.0000 MHz
Operating Temperature:
0°C ~ +50°C - A
-10°C ~ +60°C - B
-20°C ~ +70°C - C
-30°C ~ +75°C - D
-40°C ~ +85°C - L
Storage Temperature:
-40°C ~ +85°C
Frequency Stability:
Vs. Temperature:
Vs. Input Voltage:
Vs. Load:
Aging:
± 5.0 ppm
± 3.0 ppm
± 2.5 ppm
± 0.2 ppm at voltage ± 5%
± 0.2 ppm at load ± 10%
± 1.0 ppm max first year
Pulling Range:
Vss+0.5V ~ Vcc –0.5V: 5 ~ 16 ppm/V (optional)
Control Slope:
Positive
Start-Up Time:
8 ms max
Output Waveform:
Clipped Sine/10KΩ//10pF -S
CMOS/15pF/50±5%
-C
Output Voltage:
0.8 Vp-p min.
Phase Noise:
-110 dBc/Hz (offset 100Hz)
-130 dBc/Hz (offset 1KHz)
-140 dBc/Hz (offset 10KHz)
Supply Voltage:
+3.3 VDC (± 0.2%)
+5.0 VDC (± 0.3%)
-P
Supply Current:
2.0 mA max
TO-I
Pin
Configurations
#1
VC or NC
#4
Ground
#5
Output
#8
Supply VDD
All dimensions are in mm
Ordering Information
Note:
1. Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2. Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3. All specifications subject to change without notice.
Product name + Operating Temperature +
Stability + Frequency (MHz) + Other
Specification Code.
i.e. TO519B2.5S-8.0MHz ±2.5ppm/-10°C~+60°C/3.3V
Or TO519D2.5CP-8.0MHz ±2.5ppm/-30°C~+75°C/5.0V
Phone: [phone]
Fax: [phone]
© 2004 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
TO519