SR304 Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – 304.30 MHz One-Port SAW Resonator

304.30 MHz One-Port SAW Resonator
• Ideal for 304.30 MHz Transmitters
• Very Low Insertion Loss
• Quartz Stability
• Rugged, Hermetic, Low Profile TO-39 Package
SR304
Parameter
CW RF Power Dissipation
DC Voltage
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (Ta=25°C)
Rating
P
0
V_DC
±30
T_A
-10 ~ +60
T_stg
-40 ~ +85
Electronic Characteristics
Parameter
Sym Minimum
Frequency (25°C)
Insertion Loss
Nominal Frequency
Tolerance from 304.30 MHz
f_C
NS
∆f_C
-
IL
-
Quality Factor
Temperature Stability
Unloaded Q-Value
50Ω Loaded Q-Value
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Q_U
-
Q_L
-
T_O
25
f_O
-
FTC
-
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance Between any Two Pins
|f_A|
-
-
1.0
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Pin 1 to Pin 2 Static Capacitance
R_M
-
L_M
-
C_M
-
C_O
2.1
NS = Not Specified
Typical
304.30
-
1.4
14,800
2,200
-
fc
-0.032
-
-
17.5
135.2692
2.0243
2.4
Unit
dBm
V
°C
°C
Maximum
NS
± 75
2.0
-
-
55
-
-
10
-
26.0
-
-
2.7
Unit
MHz
KHz
dB
-
-
°C
KHz
ppm/°C²
ppm/yr
MΩ
Ω
µH
fF
pF
Notes:
1. The center frequency, f_C, is measured at the minimum IL point with
the resonator in the 50Ω test system.
2. Unless noted otherwise, case temperature T_C = +25°C ± 2°C.
3. Frequency aging is the change in f_C with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first year
after manufacture, decreasing in subsequent years.
4. Turnover temperature, T₀, is the temperature of maximum (or
turnover) frequency, f₀. The nominal frequency at any case
temperature, T_C, may be calculated from: f = f₀ [1 - FTC (T₀ - T_C)²].
5. This equivalent RLC model approximates resonator performance
near the resonant frequency and is provided for reference only. The
capacitance C₀ is the measured static (nonmotional) capacitance
between Pin1 and Pin2. The measurement includes case parasitic
capacitance.
6. Derived mathematically from one or more of the following directly
measured parameters: f_C, IL, 3 dB bandwidth, f_C versus T_C, and C₀.
7. The specifications of this device are based on the test circuit shown
above and subject to change or obsolescence without notice.
8. Typically, equipment utilizing this device requires emissions testing
and government approval, which is the responsibility of the
equipment manufacturer.
9. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
10. For questions on technology, prices and delivery please contact our
sales offices or e-mail to [e-mail].
Phone: [phone]
Fax: [phone]
© 2004 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SR304