SF90.5B Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – Surface Acoustic Wave Resonator Filter

90.50 MHz SAW Filter
• Surface Acoustic Wave Resonator Filter
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• F-16 Metal Thru-Hole Package
SF90.5B
Parameter
Input Power Level
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (Ta=25°C)
Rating
P_in
0
V_DC
30
T_A
-10 ~ +60
T_stg
-40 ~ +85
Unit
dBm
V
°C
°C
Electrical Characteristics
Parameter
Sym Minimum
Center Frequency (25°C)
fc
NS
Insertion Loss at fc
IL
-
3dB Bandwidth
Passband Ripple (fc ± 15 KHz)
BW3
45
∆α
-
Stopband Attenuation
fc ± 60 KHz
fc ± 120 KHz
fc - 930 …fc - 890 KHz
fc - 4020 …fc - 3980 KHz
15
42
α
55
70
Temperature Stability
Turnover Temperature
Frequency Temperature Coefficient
To
25
FTC
-
Group Delay
Absolute at fc
Deviation fc ± 10 KHz
τ
10
∆τ
-
DC Insulation Resistance Between any Two Pins
-
1.0
NS = Not Specified
Typical
90.50
2.0
62
0.2
21
47
62
80
-
0.032
15
2.0
-
Maximum
NS
4.0
-
1.0
-
-
-
-
55
-
18
8.0
-
Unit
MHz
dB
KHz
dB
dB
dB
dB
dB
°C
ppm/°C
µSec
µSec
MΩ
Notes:
1. The frequency f_C is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, f_C. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. Frequency aging is the change in f_C with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first
year after manufacture, decreasing in subsequent years.
5. Turnover temperature, T₀, is the temperature of maximum (or
turnover) frequency, f₀. The nominal frequency at any case
temperature, T_C, may be calculated from: f = f₀ [1 - FTC (T₀ - T_C)²].
6. The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
7. All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
8. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
9. For questions on technology, prices and delivery please contact
our sales offices or e-mail [e-mail] .
Phone: [phone]
Fax: [phone]
© December 2005 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SF90.5B