SF5903 Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – 868.30 MHz SAW Filter

868.30 MHz SAW Filter
• Designed to Provide Front-end Selectivity in 868.30 MHz
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Ultra Miniature Ceramic QCC8C SMD Package
• Complies with Directive 2002/95/EC (RoHS Compliant)
SF5903
Parameter
Input Power Level
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (Ta=25°C)
Rating
P_in
10
V_DC
12
T_A
-10 ~ +60
T_stg
-40 ~ +85
Unit
dBm
V
°C
°C
Parameter
Electronic Characteristics
Sym
Minimum
Nominal Frequency (at 25°C)
(Center frequency between 3dB point)
f_C
NS
Insertion Loss Attenuation
IL
-
3dB Passband
Passband Ripple
BW₃
-
-
-
Rejection
At f_C - 21.4 MHz (Image)
At f_C - 10.7 MHz (LO)
Ultimate
-
30
-
20
-
-
Operating Temperature Range
Temperature Stability
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
Absolute Value during the First Year
T_C
-10
T_O
25
f_O
-
FTC
-
|fA|
-
DC Insulation Resistance Between any Two Pins
-
1.0
NS = Not Specified
Typical
868.30
3.5
1.2
-
42
35
60
-
-
f_C
0.032
-
-
Maximum
NS
5.5
-
±1.0
-
-
-
+60
55
-
-
10
-
Unit
MHz
dB
MHz
dB
dB
dB
dB
°C
°C
MHz
ppm/C²
ppm/yr
MΩ
Notes:
1. The frequency f_C is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, f_C. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. Frequency aging is the change in f_C with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first
year after manufacture, decreasing in subsequent years.
5. Turnover temperature, T₀, is the temperature of maximum (or
turnover) frequency, f₀. The nominal frequency at any case
temperature, T_C, may be calculated from: f = f₀ [1 - FTC (T₀ - T_C)²].
6. The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
7. All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
8. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
9. For questions on technology, prices and delivery please contact
our sales offices or e-mail [e-mail].
Phone: [phone]
Fax: [phone]
© 2007 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SF5903