SF5512 Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – 480.00 MHz SAW Filter

480.00 MHz SAW Filter
z Ideal for DBS Receivers, IF Filter
z Constant Group Delay
z Improved ESD capability by integrated shunt resistors
z Ultra Miniature Ceramic QCC8C SMD Package
z Complies with Directive 2002/95/EC (RoHS Compliant)
SF5512
Absolute Maximum Rating (Ta=25°C)
Parameter
Rating
Unit
AC Voltage Between Any Two Pins
V_PP
5
V
DC Voltage Between Any Two Pins
V_DC
0
V
Operating Temperature Range
T_A
-25 ~ +85
°C
Storage Temperature Range
T_stg
-40 ~ +85
°C
Electronic Characteristics
Parameter
Sym Minimum
Center Frequency (25°C)
Insertion Attenuation
Between 3dB point
Tolerance from 480.00 MHz
f_C
NS
∆f_C
-
α
-
3dB Bandwidth
Relative Attenuation
BW₃
25.60
466.50 MHz
-
Lower Sidelobe
493.50 MHz
430.00 … 455.50 MHz
αrel
-
40
Upper Sidelobe
504.50 … 530.00 MHz
38
Reflected Wave Signal Suppression
0.1µs … 2.0µs after main pulse
-
40.0
Amplitude Ripple (p-p)
473.50 … 486.50 MHz
∆α
-
Group Delay
480.00 MHz
τ
-
Group Delay Ripple (p-p) 467.00 … 493.00 MHz
∆τ
-
Temperature Coefficient of Frequency
FTC
-
NS = Not Specified
Typical
480.00
-
22.5
26.60
3.0
3.2
46
43
46.0
0.6
227.5
8.5
-86
Maximum
NS
1.0
24.0
27.60
Unit
MHz
MHz
dB
MHz
4.6
dB
4.6
dB
-
dB
-
dB
-
dB
1.0
dB
-
ns
15.0
ns
-
ppm/K
Notes:
1. The frequency f_C is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, f_C. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
5. All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
7. For questions on technology, prices and delivery please contact
our sales offices or e-mail [e-mail].
Phone: [phone]
Fax: [phone]
© October 2006 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SF5512