SF5506 Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – 433.92 MHz SAW Filter

433.92 MHz SAW Filter
• Ideal Front-End Filter for 433.92 MHz Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Ultra Miniature Ceramic SMD Package
SF5506
Parameter
Input Power Level
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (T_A=25°C)
Rating
P_in
10
V_DC
12
T_A
-10 ~ +60
T_stg
-40 ~ +85
Parameter
Electronic Characteristics (T_A=25°C)
Sym
Minimum
Frequency (25°C)
(Center frequency between 3dB points)
f_C
NS
Minimum Insertion Loss
433.80 … 434.12 MHz
IL
-
3dB Passband
Passband (relative to IL)
433.76 … 434.08 MHz
433.74 … 434.10 MHz
433.68 … 434.16 MHz
BW₃
500
-
α
-
-
Relative Attenuation
10.00 … 414.00 MHz
414.00 … 428.00 MHz
428.00 … 432.84 MHz
434.92 … 442.00 MHz
442.00 … 550.00 MHz
550.00 … 1000.0 MHz
45
40
15
α_rel
10
33
45
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance Between any Two Pins
|fA|
-
-
1.0
NS = Not Specified
Unit
dBm
V
°C
°C
Typical
433.92
2.5
-
1.0
1.0
1.5
50
45
25
20
38
50
-
-
Maximum
NS
4.0
750
2.0
3.0
6.0
-
-
-
-
-
-
10
-
Unit
MHz
dB
KHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
ppm/yr
MΩ
Notes:
1. The frequency f_C is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for
minimum insertion loss at the filter center frequency, f_C. Note that
insertion loss, bandwidth, and passband shape are dependent on
the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. The specifications of this device are based on the test circuit shown
above and subject to change or obsolescence without notice.
5. All equipment designs utilizing this product must be approved by the
appropriate government agency prior to manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
7. For questions on technology, prices and delivery please contact our
sales offices or e-mail to [e-mail].
Phone: [phone]
Fax: [phone]
© April 2004 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SF5506