SF433E Datasheet, PDF (1/2 Pages) Vanlong Technology Co., Ltd. – 433.92 MHz SAW Filter

433.92 MHz SAW Filter
• Designed to Provide Front-end selectivity in 433.92 MHz
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Rugged, Hermetic, Low Profile TO-39 Package
SF433E
Parameter
CW RF Power Dissipation
DC Voltage VDC Between Any Two Pins
Operating Temperature Range
Storage Temperature Range
Absolute Maximum Rating (Ta=25°C)
Rating
P
+10
V_DC
0
T_A
-40 ~ +85
T_stg
-45 ~ +125
Unit
dBm
V
°C
°C
Parameter
Electronic Characteristics
Sym
Minimum
Nominal Frequency (at 25°C)
(Center frequency between 3dB point)
Insertion Loss
433.80 … 434.12 MHz
3dB Passband
Passband (relative to IL)
433.76 … 434.08 MHz
433.74 … 434.10 MHz
433.68 … 434.16 MHz
Relative Attenuation (relative to IL)
10.00 … 414.00 MHz
414.00 … 428.00 MHz
428.00 … 432.84 MHz
434.92 … 442.00 MHz
442.00 … 550.00 MHz
550.00 … 1000.00 MHz
Temperature coefficient of frequency
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance Between any Two Pins
f_C
NS
IL
-
BW₃
670
-
α
-
-
45
35
α_rel
15
10
35
45
FTC
-
|fA|
-
-
1.0
NS = Not Specified
Typical
433.92
2.0
730
1.0
1.0
1.5
50
40
20
15
40
50
0.032
-
-
Maximum
NS
4.0
790
Unit
MHz
dB
KHz
2.0
dB
3.0
dB
6.0
dB
-
dB
-
dB
-
dB
-
dB
-
dB
-
dB
-
ppm/K
10
ppm/yr
-
MΩ
Notes:
1. The frequency f_C is defined as the midpoint between the 3dB
frequencies.
2. Unless noted otherwise, all measurements are made with the filter
installed in the specified test fixture that is connected to a 50Ω test
system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted
for minimum insertion loss at the filter center frequency, f_C. Note
that insertion loss, bandwidth, and passband shape are dependent
on the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire
specified operating temperature range.
4. The specifications of this device are based on the test circuit
shown above and subject to change or obsolescence without
notice.
5. All equipment designs utilizing this product must be approved by
the appropriate government agency prior to manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
7. For questions on technology, prices and delivery please contact
our sales offices or email to [e-mail].
Phone: [phone]
Fax: [phone]
© April 2004 by Vanlong Technology Co., Ltd.
Email: [e-mail]
Web: http://www.vanlong.com
SF433E