CO603 Datasheet, PDF (1/1 Pages) Vanlong Technology Co., Ltd. – Oven Controlled Crystal Oscillator

Clipped-Sine & HCMOS OCXO
Oven Controlled Crystal Oscillator
• Frequency range 2.0MHz ~ 150.0MHz
• Excellent temperature stabilities
• Fast warm-up, low power consumption
• High precision glass overtone crystal
CO603
Specifications:
Frequency Range:
2.0 MHz or 150.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C - A
-10°C ~ +45°C - B
-10°C ~ +55°C - C
-20°C ~ +60°C - D
-30°C ~ +70°C - E
-40°C ~ +85°C
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10^-9
± 5 x 10^-7
± 1 x 10^-7
± 5 x 10^-8
± 1 x 10^-8
± 5 x 10^-9
± 5 x 10^-12
± 1 x 10^-10
± 5 x 10^-9
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Clipped-Sine Wave, HCMOS
Output Level:
1.0 Vp-p min clippled-sine @ 1KΩ
TTL, HCMOS compatible
Phase Noise:
-100dBc/Hz
-130sBc/Hz
-140dBc/Hz
-145dBc/Hz
@ 10 Hz
@ 100 Hz
@ 1 KHz
@ 10 KHz
Harmonics Distortion:
-25 dB
Supply Voltage:
Supply Current:
+5.0 VDC (± 5%)
+12.0 VDC (± 5%)
-P
500mA max atwarm-up
150mA max after warm-up at 25°C
Frequency Adjust:
±3.0 ppm tuning via ext potentiometer
CO-D
Pin
Configurations
1
Vcc
2
Vref
3
Vc/Nc
4
Ground
5
Output
6
Vcc Ground
All dimensions are in mm
Ordering Information
Note:
1. Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2. Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3. All specifications subject to change without notice.
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO603C18-10.0MHz
or CO603D58P-10.0MHz
Phone: [phone]
June 2001
Fax: [phone]
Email: [e-mail]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.