CO602_13 Datasheet, PDF (1/1 Pages) Vanlong Technology Co., Ltd. – Oven Controlled Crystal Oscillator

Clipped-Sine & HCMOS OCXO
Oven Controlled Crystal Oscillator
• Low power consumption
• Excellent temperature stabilities
• High stability overtone crystal
• Fast warm-up
CO602
Specifications:
Frequency Range:
1.0 MHz or 160.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C - A
-10°C ~ +45°C - B
-10°C ~ +55°C - C
-20°C ~ +60°C - D
-30°C ~ +70°C - E
-40°C ~ +85°C
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10^-9
± 5 x 10^-7
± 1 x 10^-7
± 5 x 10^-8
± 1 x 10^-8
± 5 x 10^-9
± 1 x 10^-10
± 1 x 10^-9
± 5 x 10^-8
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Sine Wave, HCMOS
Output Level:
2dBm min. Sine Wave
TTL, HCMOS compatible
Phase Noise (10MHz):
-120dBc/Hz
-140dBc/Hz
-145dBc/Hz
-150dBc/Hz
@ 10Hz
@ 100Hz
@ 1KHz
@ 10KHz
Harmonics Distortion:
-25 dB
Supply Voltage:
+3.3 VDC (± 5%)
+5.0 VDC (± 5%)
-P
Supply Current:
300mA max at warm-up
100mA max after warm-up at 25°C
Frequency Adjust:
±3.0ppm (AT-cut), ±1.0ppm (SC-cut),
CO-C
Pin
Configurations
1
Vcc
2
Vref
3
Vc/Nc
4
Ground
5
Output
All dimensions are in mm
Ordering Information
Note:
1. Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2. Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3. All specifications subject to change without notice.
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO602C18-10.0MHz
or CO602D58P-10.0MHz
Phone: [phone]
February 2009
Fax: [phone]
Email: [e-mail]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.