CO601 Datasheet, PDF (1/1 Pages) Vanlong Technology Co., Ltd. – Oven Controlled Crystal Oscillator

Clipped-Sine & HCMOS OCXO
Oven Controlled Crystal Oscillator
• Low power consumption
• Excellent temperature stabilities
• High stability AT-cut crystal
• Fast warm-up
CO601
Specifications:
CO-B
Frequency Range:
2.0 MHz or 150.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C - A
-10°C ~ +45°C - B
-10°C ~ +55°C - C
-20°C ~ +60°C - D
-30°C ~ +70°C - E
-40°C ~ +85°C
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10^-9
± 5 x 10^-7
± 1 x 10^-7
± 5 x 10^-8
± 1 x 10^-8
± 5 x 10^-9
± 2 x 10^-10
± 1 x 10^-9
± 5 x 10^-7
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Clipped-Sine Wave, HCMOS
Output Level:
Phase Noise:
Harmonics Distortion:
Supply Voltage:
Supply Current:
1.0 Vp-p min clipped-sine @ 1KΩ
TTL, HCMOS compatible
-100dBc/Hz
-130sBc/Hz
-140dBc/Hz
-145dBc/Hz
@ 10 Hz
@ 100 Hz
@ 1 KHz
@ 10 KHz
-30 dB
+5.0 VDC (± 5%)
+12.0 VDC (± 5%)
-P
400mA max at warm-up
100mA max after warm-up at 25°C
Pin
Configurations
1
Vcc
2
Vref
3
Vc/Nc
4
Ground
5
Output
All dimensions are in mm
Warm-up:
4.0 Watts max
Ordering Information
Frequency Adjust:
±3.0 ppm tuning via ext potentiometer
Note:
1. Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2. Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO601C18-10.0MHz
or CO601D58P-10.0MHz
3. All specifications subject to change without notice.
Phone: [phone]
June 2001
Fax: [phone]
Email: [e-mail]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.