SMBG5.0 Datasheet, PDF (1/6 Pages) Vaishali Semiconductor – Surface Mount TRANSZORB® Transient Voltage Suppressors

SMBG5.0 thru SMG188CA
Vishay General Semiconductor
Surface Mount TRANSZORB^® Transient Voltage Suppressors
DO-215AA (SMBG)
MAJOR RATINGS AND CHARACTERISTICS
V_WM
P_PPM
I_FSM (Unidirectional only)
T_j max.
5.0 V to 188 V
600 W
100 A
150 °C
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use C or CA suffix
(e.g. SMBG10CA).
Electrical characteristics apply in both directions.
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in Unidirectional and Bidirectional
• 600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020C, LF max peak
of 260 °C
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: DO-215AA (SMBG)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: For unidirectional types the band denotes
cathode end, no marking on bidirectional types
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 µs waveform ^(1,2) (see Fig. 1)
Peak pulse current with a 10/1000 µs waveform ⁽¹⁾
Peak forward surge current 8.3 ms single half sine-wave uni-directional only ⁽²⁾
Operating junction and storage temperature range
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above T_A = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
SYMBOL
P_PPM
I_PPM
I_FSM
T_J, T_STG
VALUE
Minimum 600
see next table
100
- 55 to + 150
UNIT
W
A
A
°C
Document Number 88456
05-Jul-06
www.vishay.com
1