English
Language : 

UH8615 Datasheet, PDF (6/9 Pages) Unisonic Technologies – HID LAMP CONTROLLER
UH8615
Preliminary
CMOS IC
 ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage
BOOST Supply Voltage
VCC
8.0
V
VCC(BOOST)
12.0
V
Input Voltage, Any Input
PWMOUT Current, Peak
VIN
-0.3 ~ +10.0
V
I(PEAK)
 1.0
A
Output Current, QOUT, QOUT, FLT
Output Current, 5VREF, LPOWER, COMP
IOUT
  10.0
mA
IOUT
  10.0
mA
ISET Current
PWMOUT Energy, Capacitive Load
-1.0
mA
5.0
μJ
Junction Temperature
Storage Temperature
TJ
+150
°C
TSTG
-65 ~ +150
°C
Note 1.All voltages with respect to GND. Currents are positive into, negative out of the specified terminal. Consult
Packaging Section of Databook for thermal limitations and considerations of packages.
2. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
 ELECTRICAL CHARACTERISTICS
(Unless otherwise stated, VCC = 6.6V, ISET = 100kΩ to GND, ADJ = 100kΩ to GND, OSC = 200pF to GND, BAT = 4V,
LOADISENSE connected to LPOWER, VO(SENSE) = 0.666V, BOOST = 10.5V, COMP connected to FB through a
100kΩ resistor, -40°C <TA< +105°C, and TA =TJ. )
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
OVERALL SECTION
BOOST Threshold to PUMP
Stop
Start
BOOST Threshold to PWMOUT
VCC Supply Current
BOOST Supply Current
VBOOST(STOP)
VBOOST(START)
ICC
ICC
9.1 9.6 10.2 V
9.2 9.7 10.3 V
5.7 6.0 7.1 V
0.1 1.0 mA
3.0 5.0 mA
BATTERY SECTION
BAT Threshold to PWMOUT
BAT Input Current
Stop
Start
VBAT(STOP)
VBAT(START)
II(BAT)
BAT = 4V
4.7 5.0 5.3 V
4.15 4.8 5.0 V
-1
1 μA
OSCILLATOR & DIVIDER SECTION
DIVPAUSE Threshold
Pause
Divide
OSC Pull - Up Current
DIVPAUSE Input Current
OSC Frequency
VPAUSE
VDIVIDE
I(OSC)
IIN
F(OSC)
OSC = 1.5V
0V < DIVPAUSE < 6V
1.1 1.5 1.9 V
0.8 1.2 1.6 V
-70 -50 -40 μA 
-8 -5 -1 μA
80 100 120 kHz
REFERENCE SECTION
5VREF Voltage
ISET Voltage
4.85 5.0 5.1 V
4.8 5.0 5.2 V
ERROR AMPLIFIER SECTION
FB Voltage
FB Sink Current
COMP Current
FB Input Current
FB Release Delay
Source
Sink
VFB
ISINK
ISOURCE
ISINK
II(FB)
2.4
VOUTSENSE = 4V, FB = 4V
0.3
FB = 2V, COMP = 4V
FB = 3V, COMP = 1V
0.2
-1
VOUTSENSE Step from 4V ~ 1V 15
2.5 2.6 V
1.5
mA
-3.0 -0.2 mA
1.0
mA
0
1 μA 
30 43 ms
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 9
QW-R118-019.a