X0202-SOT-223 Datasheet, PDF (5/5 Pages) Unisonic Technologies – SCR

UTC X0202/A
SCR
Figure 11. Thermal resistance junction to ambient versus
copper surface under tab(Epoxy printed circuit board
FR4,copper thickness: 35μm)
Rth(j-a) (℃/W)
130
120
110
100
90
80
70
60
50
40
30
20
10
0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UTC UNISONIC TECHNOLOGIES CO. LTD ⁵
QW-R301-006,A