LA2284_05 Datasheet, PDF (5/5 Pages) Unisonic Technologies – 5-DOT DUAL LED LEVEL METER DRIVER

LA2284/A
LINEAR INTEGRATED CIRCUIT

APPLICATION INFORMATION


By changing the time constant C1 and, the response, attack and release time, may be varied. In the above
application conditions, power dissipation may be operated at higher levels than the absolute maximum ratings.
The wattage of R is to be determined by the total LED current and R value recommended by the R table.
VCC
VCC=10~16V; R=100Ω
VCC= 8~14V; R=68Ω
VCC=6.5~12V; R=47Ω


TYPICAL CHARACTERISTIC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R121-002,B