4052_12 Datasheet, PDF (4/6 Pages) Unisonic Technologies – DIFFERENTIAL 4-CHANNEL ANALOG MULTIPLEXERS DEMULTIPLEXERS

4052
CMOS IC
„ DYNAMIC ELECTRICAL CHARACTERISTICS
(C_L = 50pF, T_A=25°C, V_EE≦V_SS, unless otherwise specified)
PARAMETER
V_DD-V_EE
SYMBOL
V_DC
TEST CONDITIONS
MIN TYP MAX UNIT
Propagation Delay Times
5 t_PLH, t_PHL =(0.17 ns/pF)C_L + 21.5ns
30 75 ns
Switch Input to Switch t_PLH, t_PHL
Output (R_L = 10 kΩ)
10 t_PLH, t_PHL =(0.08 ns/pF)C_L + 8.0ns
15 t_PLH, t_PHL =(0.06 ns/pF)C_L + 7.0ns
12 30 ns
10 25 ns
Inhibit to Output
t_PHZ, t_PLZ
t_PZH, t_PZL
5 (R_L=10kΩ, V_EE=V_SS)
10 Output “1” or “0” to High Impedance,
15 or High Impedance to “1” or “0” Level
300 600 ns
155 310 ns
125 250 ns
5
325 650 ns
Control Input to Output
t_PLH, t_PHL
10 R_L = 10 kΩ, V_EE = V_SS
130 260 ns
15
90 180 ns
Total Harmonic Distortion
THD
10 R_L = 10KΩ, f = 1 kHz, V_IN = 5 V_PP
0.07
%
Bandwidth
BW
10 ^{RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p,}
17
C_L = 50pF, 20 Log (V_OUT/V_IN) = -3dB)
MHz
Off Channel Feedthrough
Attenuation
10 ^{RL=1KΩ, VIN = 1/2 (VDD–VEE) p–p}
f_IN = 30MHz
-50
dB
Channel Separation
10 ^{RL = 1kΩ, VIN = 1/2 (VDD–VEE) p–p}
f_IN = 3MHz
-50
dB
Crosstalk, Control Input to
Common O/I
10 ^{R1 = 1kΩ, RL = 10kΩ Control}
t_TLH = t_THL = 20ns, Inhibit = V_SS
75
mV
Note: 1. Data of “TYP” is intended as an indication of the IC’s potential performance.
2. For voltage drops across the switch(ΔV_SW)>600mV (>300mV at high temperature), excessive V_DD current
may be drawn, i.e. the current out of the switch may contain both V_DD and switch input components. The
reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-013.E