UTC571N_15 Datasheet, PDF (3/5 Pages) Unisonic Technologies – COMPANDOR

UTC571N
LINEAR INTEGRATED CIRCUIT
 ABSOLUTE MAXIMUM RATINGS(T_A=25 °C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNITS
Operating Voltage
Power Dissipation
V_CC
SOP-16
SOP-16(W)
P_D
18
V
400
625
mW
Junction Temperature
T_J
+150
°С
Operating Temperature
T_OPR
-20 ~ +85
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
 THERMAL DATA
PARAMETER
Junction to Ambient
SOP-16
SOP-16(W)
SYMBOL
θ_JA
RATINGS
130
105
 AC ELECTRICAL CHARACTERISTICS(T_A=25 °C, V_CC=+5V, unless otherwise specified)
UNIT
°С/W
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Supply Voltage
V_CC
6
18
V
Supply Current
Output Current capability
I_CC No signal
I_OUT
20
3.2
4.8 _mA
Output Slew Rate
SR
0.5
V/μs
Gsin Cell Distortion
Untrimmed
Trimmed
0.5 2.0
0.1
%
Resister Tolerance
5
15 %
Internal Reference Voltage
1.7 1.85 2.0 V
Output DC Shift (Note 3)
Untrimmed
30 150 mV
Expandor Output Noise
No signal, 15Hz-20kHz (Note 1)
20 60
V
Unity Gain Level (Note 5)
1kHz
-1.5 0 +1.5 dBm
Gain Change (Note 2,4)
0.1
dB
Reference Drift (Note 4)
+2,-25 +20,-50 mV
Resistor Drift (Note 4)
+8,-0
%
Tracking Error(measured relative
to value at unity gain) Equals
[V_OUT-V_OUT (unity gain)]dB-V2dBm
V2=+6dBm,V1=0dB
Rectifier input,
V2=-30dBm, V1=0dB
+0.2
-1,+1.5 dB
+0.2
Channel Separation
60
dB
Note: 1. Input to V1 and V2 grounded.
2. Measured at 0dBm, 1kHz.
3. Expandor AC input change from no signal to 0dBm.
4. Relative to value at T_A = 25°C.
5. 0dBm = 775mV RMS.
6. Electrical characteristics for the UTC571N only are specified over -20 to +85°C temperature range.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 5
QW-R121-021.D