English
Language : 

4051_15 Datasheet, PDF (3/8 Pages) Unisonic Technologies – 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS
4051
CMOS IC
 ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
DC Supply Voltage (Referenced to VEE, VSS≧VEE)
VDD
-0.5 ~ +18
V
Input or Output Voltage (DC or Transient)
(Referenced to VSS for Control Inputs and VEE for Switch I/O)
VIN, VOUT
-0.5 ~ VDD +0.5
V
Input Current (DC or Transient), per Control Pin
Switch Through Current
IIN
±10
mA
ISW
±25
mA
Power Dissipation
Derating above 65℃
PD
500
mW
7
mW/°С
Junction Temperature
Operating Temperature
TJ
TOPR
125
°С
-40 ~ +125
°С
Storage Temperature
TSTG
-40 ~ +150
°С
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
 ELECTRICAL CHARACTERISTICS (TA=25℃, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX
SUPPLY REQUIREMENTS (Voltages Referenced to VEE)
Power Supply Voltage Range
VDD VDD – 3.0≧VSS≧VEE
Quiescent Current per
Package
VDD=5V
VDD=10V
VDD=15V
Control Inputs: VIN = VSS or VDD
IQ Switch I/O: VEE ≦VI/O ≦VDD,
∆VSW≦500mV(Note 2)
Total Supply Current
VDD=5V
TA=25℃ only (The channel
(Dynamic Plus Quiescent, VDD=10V ID(AV) component, (VIN-VOUT)/Ron, is
Per Package)
VDD=15V
not included.)
3
18
0.005 5
0.010 10
0.015 20
(0.07 µA/kHz) f + IQ
(0.20 µA/kHz) f + IQ
(0.36 µA/kHz) f + IQ
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE)
Recommended Peak–to–Peak
Voltage Into or Out of the Switch
VI/O Channel On or Off
0
VDD
Recommended Static or Dynamic
Voltage Across the Switch
Output Offset Voltage
ON Resistance
VDD=5V
VDD=10V
VDD=15V
∆ON Resistance Between VDD=5V
Any Two Channels in the
Same Package
VDD=10V
VDD=15V
Off–Channel Leakage Current
Capacitance, Switch I/O
Capacitance, Common O/I
Capacitance, Feedthrough
(Channel Off)
∆VSW Channel On
VO(OFF)
RON
VIN = 0V, No Load
∆VSW≦500mV
VIN = VIL or VIH (Control),
VIN = 0 to VDD (Switch)
∆RON
VIN = VIL or VIH (Control)
IOFF Channel to Channel or Any
One Channel, VDD=15V
CI/O Inhibit = VDD
CO/I Inhibit = VDD
CI/O
Pins Not Adjacent
Pins Adjacent
0
600
10
250 1050
120 500
80
280
25
70
10
50
10
45
±0.05 ±100
10
17
0.15
0.47
UNIT
V
µA
µA
VPP
mV
µV
Ω
Ω
nA
pF
pF
pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 8
QW-R502-054.D