|
4051_12 Datasheet, PDF (3/6 Pages) Unisonic Technologies – 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS | |||
|
◁ |
4051
CMOS IC
 ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
RATINGS
UNIT
DC Supply Voltage (Referenced to VEE, VSSâ§VEE)
VDD
-0.5 ~ +18
V
Input or Output Voltage (DC or Transient)
(Referenced to VSS for Control Inputs and VEE for Switch I/O)
VIN, VOUT
-0.5 ~ VDD +0.5
V
Input Current (DC or Transient), per Control Pin
IIN
±10
mA
Switch Through Current
ISW
±25
mA
Power Dissipation
Derating above 65â
500
mW
PD
7
mW/â
Junction Temperature
Operating Temperature
TJ
TOPR
125
â
-40 ~ +125
â
Storage Temperature
TSTG
-40 ~ +150
â
Note: 1.Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
 ELECTRICAL CHARACTERISTICS (TA=25â, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX
SUPPLY REQUIREMENTS (Voltages Referenced to VEE)
Power Supply Voltage Range
VDD VDD â 3.0â§VSSâ§VEE
3
18
Quiescent Current per
Package
Total Supply Current
(Dynamic Plus Quiescent,
Per Package)
VDD=5V
VDD=10V
VDD=15V
VDD=5V
VDD=10V
VDD=15V
IQ
ID(AV)
Control Inputs: VIN = VSS or VDD
Switch I/O: VEE â¦VI/O â¦VDD,
ÎVSWâ¦500mV(Note 2)
TA=25â only (The channel
component, (VIN-VOUT)/Ron, is
not included.)
0.005 5
0.010 10
0.015 20
(0.07 µA/kHz) f + IQ
(0.20 µA/kHz) f + IQ
(0.36 µA/kHz) f + IQ
SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE)
Recommended PeakâtoâPeak
Voltage Into or Out of the Switch
VI/O Channel On or Off
0
VDD
Recommended Static or Dynamic
Voltage Across the Switch
ÎVSW Channel On
0
600
Output Offset Voltage
ON Resistance
VDD=5V
VDD=10V
VDD=15V
VO(OFF)
RON
VIN = 0V, No Load
ÎVSWâ¦500mV
VIN = VIL or VIH (Control),
VIN = 0 to VDD (Switch)
10
250 1050
120 500
80
280
ÎON Resistance Between VDD=5V
25
70
Any Two Channels in the VDD=10V ÎRON
Same Package
VDD=15V
10
50
10
45
OffâChannel Leakage Current
VIN = VIL or VIH (Control)
IOFF Channel to Channel or Any
One Channel, VDD=15V
±0.05 ±100
Capacitance, Switch I/O
CI/O Inhibit = VDD
10
Capacitance, Common O/I
CO/I Inhibit = VDD
17
Capacitance, Feedthrough
Pins Not Adjacent
0.15
(Channel Off)
CI/O Pins Adjacent
0.47
UNIT
V
µA
µA
VPP
mV
µV
â¦
â¦
nA
pF
pF
pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-054.C
|
▷ |