TIP36C Datasheet, PDF (2/2 Pages) Wing Shing Computer Components – PNP PLANAR SILICON TRANSISTOR(AUDIO POWER AMPLIFIER DC TO DC CONVERTER)

TIP36C
PNP SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Base Voltage (I_E = 0)
V_CBO
-100
V
Collector-Emitter Voltage (I_B = 0)
V_CEO
-100
V
Emitter-Base Voltage (I_C = 0)
V_EBO
-5
V
Collector Current
I_C
-25
A
Collector Peak Current
I_CM
-50
A
Base Current
Total Dissipation (Tc =25 Ċ)
Junction Temperature
Storage Temperature
I_B
-5
A
P_D
125
W
T_J
+150
Ċ
T_STG
-65 ~ +150
Ċ
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER
Thermal Resistance Junction-Case
SYMBOL MIN
θ_JC
TYP
ELECTRICAL CHARACTERISTICS (Tc =25 Ċ, unless otherwise specified)
MAX
1
UNIT
Â¥/W
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
Collector Cut-off Current (I_B = 0)
I_CEO V_CE = -60 V
Emitter Cut-off Current (I_C = 0)
I_EBO V_EB = -5 V
Collector Cut-off Current (V_BE = 0)
I_CES V_CE = Rated V_CEO
Collector-Emitter Sustaining Voltage (I_B = 0) V_CEO(SUS)* I_C = -30 mA
-100
Collector-Emitter Saturation Voltage
V_CE(SAT)*
I_B = -1.5 A, I_C = -15 A
I_B = -5 A, I_C = -25 A
Base-Emitter Voltage
V_BE(ON)*
V_CE =-4 V, I_C = -15 A
V_CE = -4 V, I_C = -25 A
DC Current Gain
h_FE*
V_CE = -4 V, I_C = -1.5 A
V_CE = -4 V, I_C = -15 A
25
10
Transition Frequency
f_T V_CE = -10 V, I_C = -1 A, f = 1 MHz 3
Small Signal Current Gain
h_fe V_CE = -10 V, I_C = -1 A, f = 1 KHz 25
* Pulsed: Pulse Duration = 300 µs, Duty Cycle ≤ 2 %






















TYP
MAX UNIT
-1 mA
-1 mA
-0.7 mA
V
-1.8 V
-4 V
-2 V
-4 V
50
MHz
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R214-014,A