UTRS485 Datasheet, PDF (1/8 Pages) Unisonic Technologies – FAIL-SAFE, 2.5MBPS RS-485 TRANSCEIVERS

UNISONIC TECHNOLOGIES CO., LTD
UTRS485
Preliminary
FAIL-SAFE, 2.5MBPS, RS-485 /
RS-422 TRANSCEIVERS WITH
±15KV ESD-PROTECTED
CMOS IC
 DESCRIPTION
The UTC UTRS485 is a half-duplex transceiver designed for
RS-485 data bus network, which contains one transmitter and one
receiver. The UTC UTRS485 features a fail-safe receiver, which
guarantees the receiver to output high when the receiver inputs are
open, short or idle.
The UTC UTRS485 also features a hot-swap glitch free protection
circuits which guarantee outputs of both the transmitter and the
receiver in a high impedance state during the power up period. So that
the large short current from power to ground will be disable by glitch
free function, which will save the power and enhance the efficiency of
the power up.
The UTC UTRS485 is optimized for signal rates up to 2.5Mbps
with differential voltage of 2.3V. The UTC UTRS485 also has the
thermal shutdown function when the temperature is over 150℃ and
the protection of the current limitation in the transmitter to protect the
itself from the damage by the system-fault conditions during normal
operation.
 FEATURES
* Meet the requirements of the EIA/TIA-485 standards.
* 5.0V single power supply.
* True fail-safe receiver while maintaining EIA/TIA-485 compatibility.
* Hot-Swap glitch free protection on control inputs.
* Up to 256 transceivers on the bus.
* Driver short circuit current limit.
* Thermal shutdown for overload protection.
 ORDERING INFORMATION
Ordering Number
UTRS485G-S08-R
Package
SOP-8
SOP-8
Packing
Tape Reel
UTRS485G-S08-R
(1)Packing Type
(2)Package Type
(3)Green Package
(1) R: Tape Reel
(2) S08: SOP-8
(3) G: Halogen Free and Lead Free
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 8
QW-R113-011.c