UT912D_11 Datasheet, PDF (1/8 Pages) Unisonic Technologies – DECODERS FOR REMOTE CONTROLLER

UNISONIC TECHNOLOGIES CO.,
UT912D
DECODERS FOR REMOTE
CONTROLLER
„ DESCRIPTION
The UTC UT912D of CMOS LSIs for remote control system
applications are paired with UTC UT912E (refer to the
encoder/decoder cross reference table) and is capable of
decoding information which consists of N address bits and 12-N
data bits. For proper operation, a pair of encoder/decoder with the
same number of addresses and data format should be chosen.
The UTC UT912D also is arranged to provide 8 address bits and
4 data bits.
The decoders receive serial addresses and data from a
programmed UTC UT912E of encoders that are transmitted
together with the header bits by a RF or an infrared transmission
medium upon receipt of a trigger signal. If no error or unmatched
codes are found, the input data codes are decoded and then
transferred to the output pins. The V_T pin also goes high to
indicate a valid transmission.
„ FEATURES
* Pair with UTC UT912E
* Operating voltage: 2.4V ~ 12V
* Low power and high noise immunity CMOS technology
* Low standby current
* Built-in oscillator needs only 5% resistor
* Binary address setting
* Received codes are checked 3 times
* Capable of decoding 12 bits of information
* Address/Data number combination: 8 address bits and 4 data
bits
* Vaild transmission indicator
* Minimal external components
„ ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
UT912DL-D18-T
UT912DG-D18-T
UT912DL-S20-R
UT912DG-S20-R
UT912DL-S20-T
UT912DG-S20-T
Package
DIP-18
SOP-20
SOP-20
CMOS IC
SOP-20
DIP-18
Packing
Tube
Tape Reel
Tube
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 8
QW-R502-044.B